View Single Post
Old 21-09-2011, 08:20 PM   #16
#Russ#Es#
Hello Koni's!
 
#Russ#Es#'s Avatar
 
Join Date: Jan 2005
Location: South Sydney
Posts: 762
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: This member has made a few valuable contributions to the Forum in the Focus section, seems to know exactly what he is talking about with his posts, which are helpful and concise. 
Default Re: 2009 interior light or lack of?

Quote:
Originally Posted by casabonka
out of 10 whats the degree in difficulty in installing that second light?
I would say a 6/10, takes a little patience to run the wire through.


Quote:
Originally Posted by XpV8
that looks great, where was your entry point to run the wire inside the hood lining from?

cheers
On second thought, I ran the rear light off the front one - I had to put in a higher amp fuse. Just need to drop the lining on one side to get enough access. I joined a piece of fencing wire to feed the wire from the front to the rear and out the small hole I cut for the new light.
__________________
2006 LX FOCUS SEDAN
Titanium Grey, factory bodykit, slightly debadged
CSA Motorvatr 17's/Kumho KU31's, Eibach Prokit/Lovells rear springs, Koni Sports Kit
Lower airbox removed, K&N Panel filter
Momo gear knob + boot + pedals, Ghia boot garnish, Zetec Chrome interior door handles
JVC KW-XR816 Headunit + more to come...

#Russ#Es# is offline   Reply With Quote