Quote:
Originally Posted by ope126
I just googled it...
Main Beam = High Beam
Dipped Beam = Low Beam (headlights)
Sidelights = Parkers
Passenger Side Connector;
Pin 12 = Parkers
Pin 5 = High Beams
Pin 10 = Low Beam
Pin 7 = Ground
Pin 1 = Headlight Levelling
Pin 3 = Headlight Levelling
Pin 11 = Ground
Source for above; Haynes Manual Apr 2007 to 2012
So looks like I will try Pin 5 again and see if that helps...
|
If you connect into Pin 5, your DRLs will only dim when your high beams are on? I'm pretty sure Pin 10 is the one you want.
However, it sounds to me like you need to have your yellow DRL wire going into the headlamp pin and your blue going into the ACC.
I note that some instructions at this site:
http://www.aliexpress.com/store/prod...550251629.html state that
"the yellow wire connect to headlamp wire, or connect to side lamp controlling wire, the blue wire connect to ACC wire"... but with my DRLs it was yellow to ACC and blue to headlamp Pin 10 wire... confusing, but one of the two methods will work!