Thread: bcm problems
View Single Post
Old 03-02-2013, 03:29 PM   #2
marg99
FF.Com.Au Hardcore
 
Join Date: Jul 2008
Location: Melbourne
Posts: 807
Default Re: bcm problems

My Haynes manual says
The Generic Electronic Module is integral with the passenger compartment fuse /junction box it is responsible for central locking,headlights wipers central locking etc you must remove the footwell; side trim. but THE MANUAL WARNS EVEN A NEW MODULE NEEDS TO BE configured and initialized by a ford dealer.

So I would just double check the earth connection on the module as this is a common cause of intermittent failures
marg99 is offline   Reply With Quote