View Single Post
Old 13-12-2022, 08:23 PM   #123
PooDog
FF.Com.Au Hardcore
 
PooDog's Avatar
 
Join Date: Sep 2015
Location: nz
Posts: 1,842
Default Re: 7.3 V8 crate motor

Quote:
Originally Posted by jpd80 View Post
There’s also no provision for distributor or drive off the camshaft, maybe that shortens the length of the block….
Look at picture below, notice timing cover and water pump length

Going by online sources, the Godzilla tapes up very close to a traditional small-block Ford at 730mm long (timing cover to rear of block), 585mm wide (across valve covers) and 635mm high.

It’s roughly an inch narrower than a 351W and close to four inches narrower than a Coyote….

https://fordauthority.com/wp-content...nifold-001.png
I can't see how it could be an inch narrower than a 351 windsor if the Godzilla has a longer deck height? Are you comparing the width of the Cleveland with its 9.2 inch deck height?
__________________
Fgx xr8 winter white manual, gone but not forgotten
22 mitsubishi outlander XLS PHEV

Au11 fairmont Ghia ported gt40p heads ,comp springs and locks
Xe 264 cam,custom intake,pacemaker tri y headers
524nm torque

19 Triton GSXR manual
PooDog is online now   Reply With Quote