View Single Post
Old 18-08-2019, 04:40 PM   #38
n.mcmahon
Nicko
 
Join Date: Jul 2012
Location: Highett
Posts: 6
Default Re: WQ Fiesta Options not available in Oz

[QUOTE=Luke Plaizier;6329576]

Hi Luke,

Here is a couple of photos of the finished job. The position of the sensors is exactly as per the kit instructions as follows:

-Inner two sensors: 240mm left and right from vertical centre line of bumper.
-Outer two sensors: 620mm left and right from vertical centre line of bumper.
-All sensors are 25mm below the upper crease-line on the bumper.
-All measurements are to the centre of each sensor.

I note you have the optional stripes. I have a set of white stripes in storage that I may apply to my red XR4 at some stage. However, my rough measurements suggest that the outer edges of the stripes may be where the inner two sensors are? Let me know how this plays out for you and how you deal with the stripe. I reckon neatly cutting the stripe around the body coloured sensor would still look good.
Attached Images
File Type: jpg IMG_06622.jpg (102.3 KB, 15 views)
File Type: jpg IMG_0663_LI2.jpg (116.8 KB, 13 views)
n.mcmahon is offline   Reply With Quote