motor is in and running, but we have run out of time at the moment
lots of good wrecks have been coming in and we are flat out on other things,
we know now it can be done!!!!!!
we will get back to this project soonish but if anyones interested in the conversion i would be more than happy to discuss what mods we made to get this sucker in . i will list a basic summary here
sump is std BA
wiring loom on engine is AU
top on inlet manifold & throttle body is AU
AU crank angle sensor wiring will plug onto BA C.A.S
BA power steering hose requires a bend down the rack end then it will fit on
AU a/c compressor can be mounted onto BA compressor mount but needs to be spaced forward slightly so the belt lines up. this can be done with some 25mm angle iron and some new bolts.
AU water pipes can be fitted to BA motor with small mods
AU coil pack and leeds
AU engine mounts
AU alternator
AU knock sensor can be fitted to BA block
AU oil & temp sensors can be fitted
BA air intake
AU accel cable needs a bracket for mounting
AU exhaust fits up to BA manifold
AU injectors
fuel lines will plug straight on
i would suggest an edit for the AU
ecu , at this stage we cannot get the engine to run smooth at low revs. (but we needed more time really!!)
i hope this help with anyone wanting to put one of these motors into a AU or earlier ford