Quote:
|
Originally Posted by Greane01
If you connect into Pin 5, your DRLs will only dim when your high beams are on? I'm pretty sure Pin 10 is the one you want.
However, it sounds to me like you need to have your yellow DRL wire going into the headlamp pin and your blue going into the ACC.
I note that some instructions at this site: http://www.aliexpress.com/store/prod...550251629.html state that "the yellow wire connect to headlamp wire, or connect to side lamp controlling wire, the blue wire connect to ACC wire"... but with my DRLs it was yellow to ACC and blue to headlamp Pin 10 wire... confusing, but one of the two methods will work! |
Cheers, I will look at swapping them and seeing what happens...
I will keep you up to date!