Bundy

Yay, my 1st post here.

I've had 2 problems:

1) Heater pipe developed a small hole allowing coolant to drip out. The hole developed at the end of the pipe, where it splits into two smaller outlets. Replacement from ford was about $35 to $40 with the O-ring. Fitting was pretty easy, you just have to take out the airbox to gain access to the pipe. Of course, this meant I had to flush and refill the coolant, so the whole operation cost me just under $50.

2) Brakes shuddering under braking, even in the dry. I've just ordered new front slotted discs and pads, leaving the rears alone for now. In the future I may get the rears machined and fit a new set of pads while I'm at it.