MORE information about timing belt replacement'
cost of belt less than $100 au
time to do the job 1-2 hours
the driverside engine mount can stay in place
after you have undone the pully bolt (21 mm)
you have to undo the 6 x 10 mm nuts on the pully so it can be taken off
there is a plastic cover held on with 2 bolts covering the water pump
that plastic cover has the timing mark
that has to come off to feed the belt on properly
the alternator adjuster and the air conditioning compressor has to be lossened
too slaken off the drive belts
__________________
My car goes Brumm Brumm
|