Thread: Engine malfunction warning and P244C DTC
View Single Post
Old 19-04-2018, 05:58 PM   #6
GTLEGEND
FF.Com.Au Hardcore
 
Join Date: Mar 2013
Posts: 7,495
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Every advice post I visit where OP are seeking advice for their new vehicle, he is there and adds valuable support and advice for rectifying the problem. Really is a Legend. Technical Contributor: For members who share their technical expertise. - Issue reason: The quality of information he provides is in depth and highly valued by those posting questions. 
Default Re: Engine malfunction warning and P244C DTC
Mondeo Vehicles built after 4/2012 have 3 EGT sensors. What your describing and the DTC logged can be caused by a EGT3 sensor malfunction. EGT3 is the one at the rear end of the DPF between the heat shields. EGT2 is in the middle of the DPF, between heat shields and EGT 1 is on the non heat shielded part of the exhaust near the flange of the DPF towards the engine front side . EGT3 has a part number of CG9A-12B591-AC.

I would be checking the EGT3 sensor operation..
GTLEGEND is offline   Reply With Quote
This user likes this post: