|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
14-05-2012, 11:29 PM
|
#1 | ||
|
Regular Member
Join Date: Feb 2009
Posts: 107
|
I have an au1 ute and i am looking at a 2000 model au fairlane for parts, i want the 5L, the dash, leather interior, door trims and whole front end on my ute, what do people think of how possible this is? Will i need to swap the wiring harness from the fairlane for all the dash gear?
I think it will be an interesing combo if i can pull it off |
||
|
|
|
15-05-2012, 02:28 AM
|
#2 | ||
|
Pro Street Au Ute
Join Date: Apr 2008
Location: Rocky QLD
Posts: 1,150
|
Easy swap, good luck.
__________________
Daily. AU XR8 s2 ute auto Weekender. AU XR8 s2 sedan. 427 windsor, t56 magnum. 3.9 locker. |
||
|
|
|
|
15-05-2012, 08:08 PM
|
#3 | ||
|
Regular Member
Join Date: Dec 2011
Location: Melbourne, VIC
Posts: 175
|
All you need is time.
|
||
|
|
|
|
15-05-2012, 08:43 PM
|
#4 | |||
|
Just another mock-up..
Join Date: Sep 2006
Location: In an AU Fairlane somewhere...
Posts: 9,966
|
Quote:
By the looks of your avatar, it's true..!! haha On another note, I saw a ute that looked like yours a while back in front of brumby's heidelberg.. Was it yours..?
__________________
Desire isn't driven by the heart, the mind or the wallet. Desire comes from another place. It's created by the smell of burnt fuel under full throttle and the look a car gives you when you're washing it alone at night... see my car here: Built my own TL50!!! [SIGPIC][/SIGPIC]
|
|||
|
|
|
|
15-05-2012, 08:58 PM
|
#5 | ||
|
Regular Member
Join Date: Dec 2011
Location: Melbourne, VIC
Posts: 175
|
You found me.
|
||
|
|
|
|
15-05-2012, 08:59 PM
|
#6 | |||
|
Just another mock-up..
Join Date: Sep 2006
Location: In an AU Fairlane somewhere...
Posts: 9,966
|
Quote:
Looks great in the flesh mate..! Nice job on it..
__________________
Desire isn't driven by the heart, the mind or the wallet. Desire comes from another place. It's created by the smell of burnt fuel under full throttle and the look a car gives you when you're washing it alone at night... see my car here: Built my own TL50!!! [SIGPIC][/SIGPIC]
|
|||
|
|
|
|
15-05-2012, 09:07 PM
|
#7 | ||
|
Regular Member
Join Date: Dec 2011
Location: Melbourne, VIC
Posts: 175
|
who do you know around there.
|
||
|
|
|
|
15-05-2012, 11:05 PM
|
#8 | ||
|
FF.Com.Au Hardcore
Join Date: Nov 2008
Location: Melbourne, Vic
Posts: 1,121
|
Well essentially this is what I am doing to my wagon except only without the extra seats etc. Should all be possible, not too sure how much of the wiring would have to be changed though. Being a series 1 I would expect you would have to change a fair bit of wiring over.
Physically everything will bolt straight in though. Entire front end, dash, heaterbox, seats, door trims etc.
__________________
AU III Forte wagon - V8, 5spd man, lowered, 18" Honeycombs, Stock diff rebuilt with TruTrac LSD, Leather Ghia interior/dash, custom twin 2.5" into single 3" exhaust. Wagon Build AU I Forte Sedan - No longer
Toy Car Build |
||
|
|
|
|
15-05-2012, 11:13 PM
|
#9 | ||
|
Regular Member
Join Date: Dec 2011
Location: Melbourne, VIC
Posts: 175
|
If you need help I'm there.
|
||
|
|
|
|
16-05-2012, 04:21 PM
|
#10 | ||
|
Regular Member
Join Date: Feb 2009
Posts: 107
|
thanks for the advice guys, the fairlane i was going to look at doing it with was not in very good nick as there was front end damage and the leather was well worn so i will keep my eyes out for another
|
||
|
|
|
|
18-05-2012, 03:58 PM
|
#11 | ||
|
.
Join Date: Apr 2011
Location: NSW
Posts: 1,090
|
i got a complete fairlane front if some one wants it
__________________
TE50 T2 AU2 GHIA |
||
|
|
|
|
20-05-2012, 08:39 AM
|
#12 | ||
|
Regular Member
Join Date: Dec 2011
Location: tamworth nsw
Posts: 308
|
A couple of questions, firstly what must be done with the rear wiring harness as in door lights on the dash or do we just remove ans forget?
Are the brakes from a series 1 nu different from a a serries 2 ute because my ute nearly rips the wheel out of my hands when brakes applied on a steep incline? Do we need to change all the wireing harness's ( staying with the six) or just the body harness and bcm? And to run the vct intech do i only need to swap motor and ecu? |
||
|
|
|
|
20-05-2012, 08:52 AM
|
#13 | ||
|
Regular Member
Join Date: Dec 2011
Location: tamworth nsw
Posts: 308
|
my current progress
|
||
|
|
|
|
20-05-2012, 08:56 AM
|
#14 | |||
|
Regular Member
Join Date: Dec 2011
Location: tamworth nsw
Posts: 308
|
Quote:
|
|||
|
|
|
|
20-05-2012, 09:15 AM
|
#15 | ||
|
Regular Member
Join Date: Dec 2011
Location: Melbourne, VIC
Posts: 175
|
The door light on the dash will turn off when you disconnect the switch. The front brakes on S1 are one piston calipers S2 has two piston calipers. Use the fairlane wiring harness and graft at the first plug near the right rear wheel,the tail lights have the same colour coded wires.
|
||
|
|
|
|
20-05-2012, 09:18 AM
|
#16 | ||
|
Regular Member
Join Date: Dec 2011
Location: Melbourne, VIC
Posts: 175
|
I will pm my phone number
|
||
|
|
|
|
21-05-2012, 09:42 PM
|
#17 | ||
|
Regular Member
Join Date: Dec 2011
Location: Melbourne, VIC
Posts: 175
|
Good start they were the same colour.
|
||
|
|
|
|
21-05-2012, 10:59 PM
|
#18 | ||
|
Regular Member
Join Date: Dec 2011
Location: tamworth nsw
Posts: 308
|
Wish i had your work shop, motor and box are out now, pull the brake lines and abs module remove the nu shell and wait till xmas when ive got a couple of weeks off to do the convo.
|
||
|
|
|
|
21-05-2012, 11:02 PM
|
#19 | ||
|
Regular Member
Join Date: Dec 2011
Location: Melbourne, VIC
Posts: 175
|
|
||
|
|
|
|
21-05-2012, 11:06 PM
|
#20 | ||
|
Regular Member
Join Date: Dec 2011
Location: Melbourne, VIC
Posts: 175
|
|
||
|
|
|
Au1 ute plus au2 fairlane
Linear Mode
