Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Mondeo

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 23-06-2018, 10:58 AM   #1
evanlau
Starter Motor
 
Join Date: Jun 2018
Posts: 22
Default Mondeo Trend MY2018.25 - Digital speedo & build quality

Hi all,

Got a new Mondeo Trend petrol hatch last month. Overall, so far so good - great car to drive and most of the tech works well.

A few questions to those in the know:

1. Digital speedo - When I test drove the Titanium (they couldn't find a Trend), I asked about the major differences with the Trend. They didn't tell me about the lack of a digital speedo. In fact, they didn't even know about it until I asked during delivery! I certainly know the car has the details as when you start in Test mode you can get to a digital speedo readout, so I'm assuming it's just a feature they need to enable in the instrument cluster software. Has anyone had any luck on this?

2. Build quality - Inside seems okay so far, however I have noticed slight alignment issues with the doors and trims on the outside, e.g. the chrome trims (between body and window) do not line up all the way down each side, plus when shut the rear bottom of one of the rear doors doesn't line up with the adjacent rear quarter panel. It's minor, but noticeable. I'm wondering if it's worth asking them to address it in the free service. I'm worried they might try to fix it but make it worse! Also, is this 'acceptable' build quality?

3. Fuel economy - The average on the trip computer doesn't match (lower than) my calculated one when filling up. In Test mode, there is an AFE bias which I think adds a fudge factor to the calculation. Why would it do this? If the purpose is to make fuel consumption look lower than actual, I would have thought this would at best be misleading, at worst be against consumer law. Anyway, overall the car is not very fuel efficient even when driving it in an economical manner. So far I've achieved about 12-14L/100km even with 50% freeway mileage.
evanlau is offline   Reply With Quote Multi-Quote with this Post
 

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 01:43 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL