Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Fiesta, Festiva and Ka

Reply
 
Thread Tools Display Modes
Old 28-08-2012, 07:31 PM   #1
FestivaMad
Starter Motor
 
Join Date: Jan 2012
Posts: 5
Default 94 WB festiva mounts

Hi all got a quik one here
how many transmission/engine mounts on a 1.3L with a 3 speed auto?
online i can find 4 different ones but in the car i can only find 3 and have replaced those three as they were torn but still making a squeking noise when in gear and stationary and the engine still has a bit of movement.
the ones i replaced are the drivers side engine one and the 2 under the box.
thanks in advance

FestivaMad is offline   Reply With Quote Multi-Quote with this Post
Old 02-05-2016, 09:57 PM   #2
navneetdeo
Starter Motor
 
Join Date: May 2016
Posts: 3
Default Re: 94 WB festiva mounts

Quote:
Originally Posted by FestivaMad View Post
Hi all got a quik one here
how many transmission/engine mounts on a 1.3L with a 3 speed auto?
online i can find 4 different ones but in the car i can only find 3 and have replaced those three as they were torn but still making a squeking noise when in gear and stationary and the engine still has a bit of movement.
the ones i replaced are the drivers side engine one and the 2 under the box.
thanks in advance
was it hard to replace? did you need any special tool? how long did it take you? thanks
navneetdeo is offline   Reply With Quote Multi-Quote with this Post
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 07:47 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL