|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
16-11-2011, 06:28 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: Jun 2005
Posts: 582
|
I noticed one of my pulleys was a bit clattery when I changed my belt a couple of months ago, and came across this today...
http://www.ebay.com.au/itm/GENUINE-F...item3a6b692380 (A kit of two genuine ford pulleys) So how do you replace these pulleys, do you need a special tool or press to remove them? I saw mention in another thread about undoing 4 bolts, but I can't see anything like that on the ebay pics. Are they missing something? Alternatively, could I just replace the entire tensioner assembly? I have to go to Bayford to pick up a heater pipe o-ring so I figured I may as well do this at the same time.  |
||
|
|
|
16-11-2011, 06:33 PM
|
#2 | ||
|
Guest
Join Date: Feb 2007
Location: Gods Country
Posts: 16,258
|
There is a bolt on the back, 1/2" from memory .
HTH. |
||
|
|
|
|
16-11-2011, 11:13 PM
|
#3 | ||
|
Bugger!
Join Date: Jul 2011
Location: Albany, WA
Posts: 3,307
|
Remove the tensioner assembly, then each wheel is held on by a single bolt. Did the pulleys come with the bearings in them? Those bearings are the part that goes and can be carefully pressed out with a hammer and socket
 , but usually you can buy pulleys with the bearings already fitted.
__________________
Whoops, there goes another factory setup! Chop and change - butchering cars since 1990 
|
||
|
|
|
|
16-11-2011, 11:33 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Sep 2009
Location: Brisbane, Qld
Posts: 683
|
I bought nuline pulleys that are metal with bearings that can be pressed out.
__________________
AU XLS. |
||
|
|
|
|
17-11-2011, 04:02 PM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: Jun 2005
Posts: 582
|
I went to Bayford spares (Campbellfield) today and they did the $42 deal for me. I think it's usually about $5 more if you just buy the two idlers separately.
I can hold the middle and spin the wheel freely so I guess it includes the bearings. |
||
|
|
|
Replacing idler pulley AUIII 6 cyl non-VCT
Linear Mode
