|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
25-10-2011, 12:47 PM
|
#1 | ||
|
Starter Motor
Join Date: Oct 2011
Location: montmorency
Posts: 29
|
Gday all just need some info on the vct motor and ecu.
I have a 2000 build date fairmont and went to convert the vct parts of another car to mine. What parts do i need and can i use an xr 6 ecu or a fairmont ghia ecu and does it have to be the ecu for that year ?. I think logically the fairmont ghia ecu should work without issue but would apreciate any advice on this conversion. I know about cam limitation etc but i only want to do a small build and think for a road car this mod will be all i will want Thanks |
||
|
|
|
25-10-2011, 02:33 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
|
XR ecu gives more power and adaptive shift. you can't swap series one for series 2/3 or the other way around so series one in series one but series 2 or 3 can be swaped with each other but not to a series one
__________________
[SIGPIC][/SIGPIC]
Everyone starts off with a bag full of luck and an empty bag of experience. The trick is to fill the experience bag before the luck bag is empty. "It is better to remain silent and be thought a fool than to speak out and remove all doubt." Start a new career as a bus driver Rides: FG2 XR6 stock at this stage but a very nice ride xc 4 DOOR X CHASER 5.8 UNDER RESTO |
||
|
|
|
|
25-10-2011, 02:54 PM
|
#3 | ||
|
Starter Motor
Join Date: Oct 2011
Location: montmorency
Posts: 29
|
Bummer thanks mate was bidding on 1999 one so it must be a series 1 so wont go in my series 2 thanks mate.
Just 2 other questions What about just putting an xr6 cam in mine $ 210 brand new from Ford will it run with my standard ecu or will it need a tune and is there any power benefit ? |
||
|
|
|
|
25-10-2011, 03:00 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
|
to get it running properly you need the XR6 HP cam , fuel rail and reg and ECU or you will have difficulties
__________________
[SIGPIC][/SIGPIC]
Everyone starts off with a bag full of luck and an empty bag of experience. The trick is to fill the experience bag before the luck bag is empty. "It is better to remain silent and be thought a fool than to speak out and remove all doubt." Start a new career as a bus driver Rides: FG2 XR6 stock at this stage but a very nice ride xc 4 DOOR X CHASER 5.8 UNDER RESTO |
||
|
|
|
|
25-10-2011, 03:58 PM
|
#5 | ||
|
Starter Motor
Join Date: Oct 2011
Location: montmorency
Posts: 29
|
can get brand new xr 6 ecu for $ 350- 400 cam $ 210 new from Ford and rail $ ? dont know where to buy from .Given the head is also meant to be different to the standard intech do i need that or isnt there that much difference to matter.
|
||
|
|
|
|
25-10-2011, 04:02 PM
|
#6 | ||
|
Starter Motor
Join Date: Oct 2011
Location: montmorency
Posts: 29
|
P.s will my body control module work with xr 6 ecu.
From what i can think it should. Sorry about all the questions but it is my first computer car i have ever tried to modify the other one an xh ute i just did exhaust and intake. |
||
|
|
|
|
25-10-2011, 06:56 PM
|
#7 | ||
|
FF.Com.Au Hardcore
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
|
the head has a different casting but the valves are the same size so I would think minimal difference the BEM will be fine once the car is taught the new ECU they can be married up all this needs to be done by a mechanic with a scan tool.
all the parts can be had a lot cheaper on ebay if you keep an eye out you should be able to do the lot for 200 to 250
__________________
[SIGPIC][/SIGPIC]
Everyone starts off with a bag full of luck and an empty bag of experience. The trick is to fill the experience bag before the luck bag is empty. "It is better to remain silent and be thought a fool than to speak out and remove all doubt." Start a new career as a bus driver Rides: FG2 XR6 stock at this stage but a very nice ride xc 4 DOOR X CHASER 5.8 UNDER RESTO |
||
|
|
|
|
25-10-2011, 07:35 PM
|
#8 | ||
|
Starter Motor
Join Date: Oct 2011
Location: montmorency
Posts: 29
|
Thanks for all the info great not to be treated like an idiot for asking.
I was still into holdens  when the au first came out and remember thinking they were shockers.These days after 2 months owning one i couldnt be happier. One website has them rated as the best bang for buck 2nd hand family car around and i have to agree wholeheartedly. Chris at bluepower put it on the dyno and did a few tweaks after i put the pacey 4499s and lukey exhaust ba snorkel and k & n panel filter on and got 119 rwkw out of it from 107 and did it at a very good price. Not huge kw but the acceleration is great and it is now more fun to drive. |
||
|
|
|
|
25-10-2011, 07:42 PM
|
#9 | ||
|
Starter Motor
Join Date: Oct 2011
Location: montmorency
Posts: 29
|
Oh forgot to mention Theo who had a play with it as well.
Thanks fellas 
|
||
|
|
|
vct ecu
Linear Mode
