|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
|
|
Thread Tools | Display Modes |
14-10-2017, 02:35 PM
|
#36 | ||
|
Starter Motor
Join Date: Nov 2014
Posts: 6
|
Disclaimer - I am not giving advice simply sharing some info and data I have collected during ownership of my Focus.
2010 2L Duratec Focus LVII auto Summary – Some info not on this report but on previous reports ---------------------------------------------------- Notes: None of the oils used are the recommended viscosity or ford spec. *1 – I was unsure if the oil would have the TBN to go 15K kms so I swapped out 1L to bump up the reserve. This Fuchs oil is fairly exotic – Zinc free and the old formula had no moly, 2 typical anti-wear additives. I swapped over to M1 due to uncertain availability of Fuchs and I had an issue with long standing oil separating. I now use M1 EP 0W20 in the Duratec Focus, K24 CR-V and the Miami XR8 Sprint From these samples both MC and M1 filters kept particle size low. In my samples I've done for all my other cars, time on oil has had no adverse impact on oil condition. -------------------------------------------------------- Last sample report: |
||
|
|
Re: LS-LV Focus Duratec-HE 2L Oil Change Thread
Threaded Mode