|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| Blue Power Racing Developments The home of Blue Power. Website Link |
 |
|
|
Thread Tools | Display Modes |
12-03-2009, 11:00 AM
|
#1 | ||
|
Starter Motor
Join Date: Sep 2007
Posts: 14
|
Hi Chris,
I've had my BA XR6T tuned by you. From my memory, you regapped my plugs when you tuned it. Now it's time for me to change the spark plugs, please tell me which size should I go for. My car currently running 10psi with tune and upgrade valve spring. As I don't want to regap the plugs myself. If you recommend 0.9mm plugs, then I'll go for F6 Motocraft Platinum Plugs. If you recommend 0.8mm plugs, then I'll stick with NGK PFR6B (pre-gapped at 0.8mm). What do you think of these options? Thanks Chris |
||
|
|
|
12-03-2009, 11:32 AM
|
#2 | ||
|
KenneBell Australia
Join Date: Nov 2005
Location: Engine building room
Posts: 1,965
|
Hi mate,
factory plugs are ok for this application, however we gap them to .8. If you bring the plugs in, we are happy to gap them at no cost to you. Regards Chris
__________________
Bluepower Racing Developments Proud Australian Distributors of Kenne Bell superchargers The Quickest, The Fastest, The Baddest Boss Blower of all. www.bluepower.com.au |
||
|
|
|
Spark Plugs Gapping
Linear Mode
