Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 06-01-2005, 04:58 PM   #1
russellw
Chairman & Administrator
Donating Member3
 
russellw's Avatar
 
Join Date: Dec 2004
Location: 1975
Posts: 106,469
Community Builder: In recognition of those who have helped build the AFF community. - Issue reason: Raptor: For Continued, and prolonged service to the wider Ford Community 
Default AU Parts Data

Refer to the Tech Document here
__________________

__________________________________________________

Observatio Facta Rotae



Last edited by russellw; 20-10-2019 at 07:06 AM.
russellw is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 06-01-2005, 05:02 PM   #2
Casper
FF.Com.Au Hardcore
Contributing Member
 
Casper's Avatar
 
Join Date: Dec 2004
Posts: 12,095
Default

Fantastic Russ, works a treat too!

Thanks for all your efforts and patience.
__________________
Older, wiser, poorer.


Now in Euro-Trash. VW Coupe V6 4motion.
Casper is offline   Reply With Quote Multi-Quote with this Post
Old 06-01-2005, 06:06 PM   #3
Twisted
Moderator
Contributing Member
 
Twisted's Avatar
 
Join Date: Dec 2004
Location: Melbourne
Posts: 1,049
Default

Awesome work Russ! Thanks mate.
__________________
:evil3: - '03 XR6T - :evil3:
Mercury Silver
Manual, Premium Sound, XR8 18's


SHOW YOUR SUPPORT
FordForums.com.au
Hats, Stickers & Patches are now available!
Twisted is offline   Reply With Quote Multi-Quote with this Post
Old 06-01-2005, 10:04 PM   #4
LG
FF.Com.Au Hardcore
 
LG's Avatar
 
Join Date: Dec 2004
Location: Melbourne, Victoria
Posts: 2,435
Default

Excellent work! Great work Russ & MetalMan & Casper.
__________________
AUIII Falcon Forte, with SIX Appeal
LG is offline   Reply With Quote Multi-Quote with this Post
Old 06-01-2005, 10:10 PM   #5
LG
FF.Com.Au Hardcore
 
LG's Avatar
 
Join Date: Dec 2004
Location: Melbourne, Victoria
Posts: 2,435
Default

Ok, I've done a quick search. I was just looking at the XR Leather door trims, which somehow manage to be cheaper than the cloth insert? But anyway.

Do these door trims come with the leather arm rest? The triang-ula pad where u rest your elbow? Or is it an additional item? And would this be it...?

"ARMREST ASSY - REAR DR, RH, XR, WARM CHARCOAL, WITH LEATHER TRIM" ?

Does anyone know what the DR means, because it's on a few items?

Sorry for the annoying questions :P Just tell me to: : or :togo: :1syellow1
__________________
AUIII Falcon Forte, with SIX Appeal
LG is offline   Reply With Quote Multi-Quote with this Post
Old 06-01-2005, 10:18 PM   #6
russellw
Chairman & Administrator
Donating Member3
 
russellw's Avatar
 
Join Date: Dec 2004
Location: 1975
Posts: 106,469
Community Builder: In recognition of those who have helped build the AFF community. - Issue reason: Raptor: For Continued, and prolonged service to the wider Ford Community 
Default

DR (as stated in the instructions) stands for DOOR.
The armrest doesn't come with the door trim and you are right in your choice of item.

Cheers
Russ
__________________

__________________________________________________

Observatio Facta Rotae


russellw is offline   Reply With Quote Multi-Quote with this Post
Old 07-01-2005, 08:31 AM   #7
EFFalcon
Last warning
 
EFFalcon's Avatar
 
Join Date: Dec 2004
Location: Mornington Peninsula, Victoria HeadCount: 3
Posts: 11,198
Default

woah..
thats a fantastic tool

Any chance that'll be implemented for other models?
__________________
FALCN6 - Turbo, Air Bag Suspension - Hibernating
EL GT - Supercharged
NASCAR - 83 Thunderbird , Bagged
DAILY - BA Fairlane Ghia, Boss 260 Turbo
OFFROADER - Ford Explorer
EFFalcon is offline   Reply With Quote Multi-Quote with this Post
Old 07-01-2005, 10:10 AM   #8
russellw
Chairman & Administrator
Donating Member3
 
russellw's Avatar
 
Join Date: Dec 2004
Location: 1975
Posts: 106,469
Community Builder: In recognition of those who have helped build the AFF community. - Issue reason: Raptor: For Continued, and prolonged service to the wider Ford Community 
Default

The format I have the data in makes it unsuitable for easy creation of the database fields - it took about 40 hours to extract and reformat the 305 pages of data to make that table and it isn't even one of the larger ones.

It's not too bad for the really old ones like XA-XC as there are very few parts left (about 21 pages) but for EF-EL (177 pages) and EA-ED (272 pages) it's hard work.

We have left an extra field in the table to add the model series but it may be some time yet before that becomes available.

Cheers
Russ

Quote:
Originally Posted by EFFalcon
woah..
thats a fantastic tool

Any chance that'll be implemented for other models?
__________________

__________________________________________________

Observatio Facta Rotae


russellw is offline   Reply With Quote Multi-Quote with this Post
Old 07-01-2005, 08:50 PM   #9
russellw
Chairman & Administrator
Donating Member3
 
russellw's Avatar
 
Join Date: Dec 2004
Location: 1975
Posts: 106,469
Community Builder: In recognition of those who have helped build the AFF community. - Issue reason: Raptor: For Continued, and prolonged service to the wider Ford Community 
Default

Please re-read the instructions above as the database has been updated to include the EA-ED range.

Russ
__________________

__________________________________________________

Observatio Facta Rotae


russellw is offline   Reply With Quote Multi-Quote with this Post
Old 07-01-2005, 08:51 PM   #10
Casper
FF.Com.Au Hardcore
Contributing Member
 
Casper's Avatar
 
Join Date: Dec 2004
Posts: 12,095
Default

Quote:
Originally Posted by russellw
Please re-read the instructions above as the database has been updated to include the EA-ED range.

Russ
Russ....

Your amazing.
__________________
Older, wiser, poorer.


Now in Euro-Trash. VW Coupe V6 4motion.
Casper is offline   Reply With Quote Multi-Quote with this Post
Old 07-01-2005, 09:37 PM   #11
12
Silhouette AU1 TS50.
 
12's Avatar
 
Join Date: Dec 2004
Location: Radiator Springs, Victoria.
Posts: 2,135
Default

Russ (or anyone), I have searched the data base but come up with nothing for part No's and price's for the two items in the photo attached. I'm looking at the AUII/III LTD center dash console trim panel around that holds the two air vents (in Black please), and the woodgrain trim panel around the radio and sat nav screen. Also, would you know if the woodgrain panel was availble in the carbon fibre look that is available standard on the T-series models? Maybe for a AUII/III TL50 with sat nav optioned?? Any help is very much appreciated, thank you.
12 is offline   Reply With Quote Multi-Quote with this Post
Old 07-01-2005, 10:19 PM   #12
russellw
Chairman & Administrator
Donating Member3
 
russellw's Avatar
 
Join Date: Dec 2004
Location: 1975
Posts: 106,469
Community Builder: In recognition of those who have helped build the AFF community. - Issue reason: Raptor: For Continued, and prolonged service to the wider Ford Community 
Default

Quote:
Originally Posted by AUGZMK
Russ (or anyone), I have searched the data base but come up with nothing for part No's and price's for the two items in the photo attached. I'm looking at the AUII/III LTD center dash console trim panel around that holds the two air vents (in Black please), and the woodgrain trim panel around the radio and sat nav screen. Also, would you know if the woodgrain panel was availble in the carbon fibre look that is available standard on the T-series models? Maybe for a AUII/III TL50 with sat nav optioned?? Any help is very much appreciated, thank you.
Here we run into the classic naming issue which is why the graphics that I have make it a bit easier for me.

The trim around the centre stack is called a bezel:

AU2 10E948 A1 BEZEL DISPLAY MON, COTTON WALNUT, LTD $167.44
AU2 10E948 A1D BEZEL DISPLAY MON, VIRTUAL CAMPHOR, GHIA/FAIRLANE $154.96

the T-Series ones only look as if they are available as a complete unit and they aren't cheap!

The other part is a lower instrument panel moulding (abbreviated to INSTR just to make it easy)

AU2 F044A12 A1D PANEL INSTR FINISH, LOWER, FORTE/FUTURA/FMT/GHIA/FAIRLANE, DK GRAPHITE $56.70
AU2 F044A85 A1D PANEL INSTR FINISH, LOWER, (-)XR/LTD, DK GRAPHITE

Cheers
Russ
__________________

__________________________________________________

Observatio Facta Rotae


russellw is offline   Reply With Quote Multi-Quote with this Post
Old 07-01-2005, 10:35 PM   #13
12
Silhouette AU1 TS50.
 
12's Avatar
 
Join Date: Dec 2004
Location: Radiator Springs, Victoria.
Posts: 2,135
Default

Thank you Russell, much appreciated.
Quote:
Originally Posted by russellw
the T-Series ones only look as if they are available as a complete unit and they aren't cheap!
Ok, I'll sit down now. Part No. and price please? *me keeps pills near incase of a heart attack*
Again, thank you.
12 is offline   Reply With Quote Multi-Quote with this Post
Old 07-01-2005, 10:48 PM   #14
russellw
Chairman & Administrator
Donating Member3
 
russellw's Avatar
 
Join Date: Dec 2004
Location: 1975
Posts: 106,469
Community Builder: In recognition of those who have helped build the AFF community. - Issue reason: Raptor: For Continued, and prolonged service to the wider Ford Community 
Default

Quote:
Originally Posted by AUGZMK
Thank you Russell, much appreciated.
Ok, I'll sit down now. Part No. and price please? *me keeps pills near incase of a heart attack*
Again, thank you.
TAU 10D885 A DISPLAY INDICATOR, RED, URBAN GEOMETRIC FINISH, LCD/ILLUMINATION/WARNINGS, 4 DR SED, TE50 $634.00
TAU 10D885 B DISPLAY INDICATOR, RED, RAINDROPS FINISH, LCD/ILLUMINATION/WARNINGS, 4 DR SED, TE50 $775.00

Russ
__________________

__________________________________________________

Observatio Facta Rotae


russellw is offline   Reply With Quote Multi-Quote with this Post
Old 07-01-2005, 10:54 PM   #15
Casper
FF.Com.Au Hardcore
Contributing Member
 
Casper's Avatar
 
Join Date: Dec 2004
Posts: 12,095
Default

Russ, sorry to be a pain, I checked out the info on the database and couldnt find a clear answer...
Do you have part numbers for the VCT cam in Series 1 and 3 and is it different?
I could only find 1 cam for the VCT and it didnt say what Series it was from.
__________________
Older, wiser, poorer.


Now in Euro-Trash. VW Coupe V6 4motion.

Last edited by Casper; 07-01-2005 at 11:02 PM.
Casper is offline   Reply With Quote Multi-Quote with this Post
Old 07-01-2005, 11:02 PM   #16
12
Silhouette AU1 TS50.
 
12's Avatar
 
Join Date: Dec 2004
Location: Radiator Springs, Victoria.
Posts: 2,135
Default

Oh my!!.. *pops a couple of medication pills into mouth* Gulp! Thanks Russ, I'll pass... ha ha. You were right, they're not cheap bits of "plastic". Thanks again Russ. (insert missing thumbs up smiley here)
12 is offline   Reply With Quote Multi-Quote with this Post
Old 08-01-2005, 10:49 AM   #17
russellw
Chairman & Administrator
Donating Member3
 
russellw's Avatar
 
Join Date: Dec 2004
Location: 1975
Posts: 106,469
Community Builder: In recognition of those who have helped build the AFF community. - Issue reason: Raptor: For Continued, and prolonged service to the wider Ford Community 
Default

Quote:
Originally Posted by Casper
Russ, sorry to be a pain, I checked out the info on the database and couldnt find a clear answer...
Do you have part numbers for the VCT cam in Series 1 and 3 and is it different?
I could only find 1 cam for the VCT and it didnt say what Series it was from.
It didn't change and the ERT 6250 B part is the correct one as far as I can see.

Cheers
Russ
__________________

__________________________________________________

Observatio Facta Rotae


russellw is offline   Reply With Quote Multi-Quote with this Post
Old 08-01-2005, 10:55 AM   #18
Casper
FF.Com.Au Hardcore
Contributing Member
 
Casper's Avatar
 
Join Date: Dec 2004
Posts: 12,095
Default

Quote:
Originally Posted by russellw
It didn't change and the ERT 6250 B part is the correct one as far as I can see.

Cheers
Russ
Thanks Russ, thought that might be the case.
__________________
Older, wiser, poorer.


Now in Euro-Trash. VW Coupe V6 4motion.
Casper is offline   Reply With Quote Multi-Quote with this Post
Old 08-01-2005, 12:22 PM   #19
loxxr6
XB in parts...
 
loxxr6's Avatar
 
Join Date: Dec 2004
Location: Sydney
Posts: 2,890
Default

Hi Russ,

Is this the correct part no for a weathershield AU F03682 A ??

Recent wet weather has prompted me to do something about the damn dripping in the car window.
__________________


Has Fez and XB.


loxxr6 is offline   Reply With Quote Multi-Quote with this Post
Old 08-01-2005, 12:39 PM   #20
russellw
Chairman & Administrator
Donating Member3
 
russellw's Avatar
 
Join Date: Dec 2004
Location: 1975
Posts: 106,469
Community Builder: In recognition of those who have helped build the AFF community. - Issue reason: Raptor: For Continued, and prolonged service to the wider Ford Community 
Default

Quote:
Originally Posted by loxxr6
Hi Russ,

Is this the correct part no for a weathershield AU F03682 A ??

Recent wet weather has prompted me to do something about the damn dripping in the car window.
I suspect these are the right ones:

ER 18492 A WEATHERSHIELD, RH, (-)FAIRLANE/LTD $71.30
ER 18493 A WEATHERSHIELD, LH, (-)FAIRLANE/LTD $71.30

The one you found is the moulding that runs down the side of the windscreen!

Cheers
Russ
__________________

__________________________________________________

Observatio Facta Rotae


russellw is offline   Reply With Quote Multi-Quote with this Post
Old 08-01-2005, 01:21 PM   #21
loxxr6
XB in parts...
 
loxxr6's Avatar
 
Join Date: Dec 2004
Location: Sydney
Posts: 2,890
Default

The one you found is the moulding that runs down the side of the windscreen!

Bugger.

Thanks again!
__________________


Has Fez and XB.


loxxr6 is offline   Reply With Quote Multi-Quote with this Post
Old 11-01-2005, 08:08 AM   #22
normell
Regular Member
 
Join Date: Dec 2004
Posts: 81
Default

I may be dumb, hey stop that sniggering, but can't find anything when entering air box lids, or snorkels. So do I need EXACT descriptions, or part numbers ??
__________________
Every day above ground is a good day.

Still Drinking & Driving, But Not At The Same Time
normell is offline   Reply With Quote Multi-Quote with this Post
Old 11-01-2005, 08:21 AM   #23
Casper
FF.Com.Au Hardcore
Contributing Member
 
Casper's Avatar
 
Join Date: Dec 2004
Posts: 12,095
Default

Quote:
Originally Posted by normell
I may be dumb, hey stop that sniggering, but can't find anything when entering air box lids, or snorkels. So do I need EXACT descriptions, or part numbers ??
Try intake, seems to work.
__________________
Older, wiser, poorer.


Now in Euro-Trash. VW Coupe V6 4motion.
Casper is offline   Reply With Quote Multi-Quote with this Post
Old 11-01-2005, 08:32 AM   #24
normell
Regular Member
 
Join Date: Dec 2004
Posts: 81
Default

Quote:
Originally Posted by Casper
Try intake, seems to work.
Yeah, works, but which is the air box lid ?????
__________________
Every day above ground is a good day.

Still Drinking & Driving, But Not At The Same Time
normell is offline   Reply With Quote Multi-Quote with this Post
Old 13-01-2005, 12:04 PM   #25
Duffman
Oh Yeah!
 
Join Date: Jan 2005
Location: Manhattan, NY
Posts: 1,024
Default

Sorry to have to ask but I tried the LED dash mod of AUfalcon and when using the allen keys to pull the dash out it actually damaged it a fair bit (mine was in there mega tight). The clear plastic on the front of the dash has actually pulled away from the black lining on the top of the dash so now when they lights are on you can see a line running across the top where the dash dash doesnt fully meet the front. Iv tried to fix it but just cant :(

I was wondering can the front part of the cluster be purchased? As in the plastic front with the black part that goes on over the needles... the bit that clips into the white part.... so hard to expalin.

Here is the best picture I can draw
http://www.lexicon.net/ghagen/cluster.JPG

Is it possible to purchase the front clear piece plus the backing seperatly from the cluster ?
Duffman is offline   Reply With Quote Multi-Quote with this Post
Old 13-01-2005, 12:08 PM   #26
Casper
FF.Com.Au Hardcore
Contributing Member
 
Casper's Avatar
 
Join Date: Dec 2004
Posts: 12,095
Default

I'd seriously look at getting the bits from a wrecker to be honest. Might be quicker and that area usually isnt damaged in a wrecked AU.
__________________
Older, wiser, poorer.


Now in Euro-Trash. VW Coupe V6 4motion.
Casper is offline   Reply With Quote Multi-Quote with this Post
Old 13-01-2005, 12:59 PM   #27
LG
FF.Com.Au Hardcore
 
LG's Avatar
 
Join Date: Dec 2004
Location: Melbourne, Victoria
Posts: 2,435
Default

Quote:
Originally Posted by blinkau
Sorry to have to ask but I tried the LED dash mod of AUfalcon and when using the allen keys to pull the dash out it actually damaged it a fair bit (mine was in there mega tight). The clear plastic on the front of the dash has actually pulled away from the black lining on the top of the dash so now when they lights are on you can see a line running across the top where the dash dash doesnt fully meet the front. Iv tried to fix it but just cant :(

I was wondering can the front part of the cluster be purchased? As in the plastic front with the black part that goes on over the needles... the bit that clips into the white part.... so hard to expalin.

Here is the best picture I can draw
http://www.lexicon.net/ghagen/cluster.JPG

Is it possible to purchase the front clear piece plus the backing seperatly from the cluster ?
I got the parts from Ford, cause i buggered mine. I got the black plastic piece and the clear lens. Have you got an XR Cluster?

The lens is only $20, and the mask is only $20. So no more than $50.

I think these are the parts you need:
ER 10890 A MASK INST CLUSTER, PAINTED
ER 10887 A LENS INST CLUSTER

Those parts are for a forte/low-series cluster, i think.
__________________
AUIII Falcon Forte, with SIX Appeal
LG is offline   Reply With Quote Multi-Quote with this Post
Old 13-01-2005, 01:27 PM   #28
Duffman
Oh Yeah!
 
Join Date: Jan 2005
Location: Manhattan, NY
Posts: 1,024
Default

LG you are a life saver. I was thinking ford would want like $150 for the front plastic.. wouldn't be surprised. Its for a low sereis cluster and you just the front and the black plasic bit that goes aorund the outside and the needles.

I was thinking of the wreckers but if I could find one I know they would want like $200, mine isnt damaged just the plasic bit from getting it out with the allen keys.

Thanks again
Duffman is offline   Reply With Quote Multi-Quote with this Post
Old 13-01-2005, 02:32 PM   #29
russellw
Chairman & Administrator
Donating Member3
 
russellw's Avatar
 
Join Date: Dec 2004
Location: 1975
Posts: 106,469
Community Builder: In recognition of those who have helped build the AFF community. - Issue reason: Raptor: For Continued, and prolonged service to the wider Ford Community 
Default

Not sure if you mean this bit:

ER 10887 A LENS INST CLUSTER $26.20

See the image below.

Russ


Quote:
Originally Posted by blinkau
Sorry to have to ask but I tried the LED dash mod of AUfalcon and when using the allen keys to pull the dash out it actually damaged it a fair bit (mine was in there mega tight). The clear plastic on the front of the dash has actually pulled away from the black lining on the top of the dash so now when they lights are on you can see a line running across the top where the dash dash doesnt fully meet the front. Iv tried to fix it but just cant :(

I was wondering can the front part of the cluster be purchased? As in the plastic front with the black part that goes on over the needles... the bit that clips into the white part.... so hard to expalin.

Here is the best picture I can draw
http://www.lexicon.net/ghagen/cluster.JPG

Is it possible to purchase the front clear piece plus the backing seperatly from the cluster ?
Attached Images
File Type: jpg cluster.jpg (69.8 KB, 123 views)
__________________

__________________________________________________

Observatio Facta Rotae


russellw is offline   Reply With Quote Multi-Quote with this Post
Old 13-01-2005, 02:42 PM   #30
russellw
Chairman & Administrator
Donating Member3
 
russellw's Avatar
 
Join Date: Dec 2004
Location: 1975
Posts: 106,469
Community Builder: In recognition of those who have helped build the AFF community. - Issue reason: Raptor: For Continued, and prolonged service to the wider Ford Community 
Default

Quote:
Originally Posted by normell
Yeah, works, but which is the air box lid ?????
EL 9661 A COVER ASY AIR CLNR $82.50

see diagram below:

Cheers
Russ
Attached Images
File Type: jpg airbox.jpg (58.4 KB, 123 views)
__________________

__________________________________________________

Observatio Facta Rotae


russellw is offline   Reply With Quote Multi-Quote with this Post
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 07:59 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL