|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
14-08-2014, 08:12 PM
|
#1 | ||
|
Tippy-tronic Free Zone
Join Date: Dec 2008
Posts: 897
|
Saw a post on another list last night that got me wondering.....
Simple newbie-style question, but now I'm confusalated  The dished washer that goes either side of your trackarm bush for the sway bar, which way around should it be mounted? - concave to bush (compress the bush) - convex to bush (let it ride around the washer face as things move) I've only ever seen them mounted convex face to bush, but after 20-40yrs of different mechanics and pulling things apart, who knows which swaps have occurred. The Manual says....'fit the correct way around...'.... and then neglects to tell you which is actually the correct way. Just thought I'd check, and maybe learn something new after all these years. |
||
|
|
|
14-08-2014, 08:16 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Nov 2013
Posts: 2,037
|
Concave out, convex toward the bush. The angle between the sway bar and arm changes quite a bit as the suspension moves so this stops the washers binding on the arm.
|
||
|
|
|
Sway Bar to Track Arm Bush Washers - Which way around?
Linear Mode
