Go Back   Australian Ford Forums > MotorSport > Drag Racing

Drag Racing Discuss Drag Racing here be it dirt or tarmac. Sponsored by Sydney Dragway.

Reply
 
Thread Tools Display Modes
Old 16-01-2011, 01:10 AM   #1
Zaxx
FF.Com.Au Hardcore
 
Join Date: Jan 2009
Posts: 622
Default Launch Tips.

Hey all,

Now i'm new to the whole Drag Racing thing here..
And i'm really after getting some numbers for my XR..

Any tips for launching the 4Spd Auto? In a BA XR6 With a few simple mods?
(See sig.)

I'm not after massive numbers, and i'm not hoping to break records, but for a bit of a fun night out, and to quell some curiosity, I wouldn't mind giving it ago?

Tips?
When should I shift?
Is it as simple as stomping and steering?

Thanks all.

Zaxx is offline   Reply With Quote Multi-Quote with this Post
Old 16-01-2011, 12:13 PM   #2
Ivan
Regular Member
 
Join Date: May 2010
Location: Hell
Posts: 280
Default

Nice questions and the only answer is to try it out. Test shift points to see what is best. Launch RPM is the same. Most people will hold the car on the start line slightly below the stall point of the convertor and nail it on the last amber light. Most drag strips have Test and Tunes were you can run as much as you like.


Ian
Ivan is offline   Reply With Quote Multi-Quote with this Post
Old 16-01-2011, 03:23 PM   #3
GTP owner
FF.Com.Au Hardcore
 
GTP owner's Avatar
 
Join Date: Sep 2006
Location: TAS
Posts: 2,551
Default

When stock i always left it in performance mode but self shifting. On the line i had the brake pressed hard and the accelerator all the way to the floor. Release brake on the last amber and let the car do its thing
__________________
XA coupe 8.8sec @ 150mph http://www.fordforums.com.au/showthr...coupe+drag+car
BA GT-P for the shed
Mustang GT for the other half
E3 chubsport - fully fat (and slow), sitting there waiting for me to get sick of it and sell it.
BA XR6T for a daily
NT Pajero for the bush
XB 4 door project- swallows a BF xr6 turbo

My dad is a generous bloke. He gave away his dead car batteries free of charge....
GTP owner is offline   Reply With Quote Multi-Quote with this Post
Old 17-01-2011, 12:59 AM   #4
Zaxx
FF.Com.Au Hardcore
 
Join Date: Jan 2009
Posts: 622
Default

Thanks for the replys, i'll have to whistle down there and have a go.


Ta.
Zaxx is offline   Reply With Quote Multi-Quote with this Post
Old 18-01-2011, 01:24 PM   #5
DBourne
FF.Com.Au Hardcore
 
DBourne's Avatar
 
Join Date: Mar 2007
Location: sydney.nsw.au
Posts: 6,119
Default

When I had my 8, (though it was a 6spd) I just put it in to perf, then stomp and steer.

You'll be too excited first few goes to really think about shift points etc.
__________________
flickr
DBourne is offline   Reply With Quote Multi-Quote with this Post
Old 18-01-2011, 08:49 PM   #6
ebxr8240
Performance moderator
 
ebxr8240's Avatar
 
Join Date: Feb 2005
Location: St Clair..N.S.W
Posts: 14,875
Technical Contributor: For members who share their technical expertise. - Issue reason: Always willing to help out with technical advice. 
Default

Fit a BIG trans cooler.. First few runs could just try leaving it up to auto to change gears.. 1st to 2nd comes up real quick...
Good luck...
__________________
Real cars are not driven by front wheels,real cars lift them!!...
BABYS ARE BOTTLE FED, REAL MEN GET BLOWN.
Don't be afraid to try something new. Remember, amateurs built the Ark...Professionals built the Titanic!
Dart 330ci block turbo black pearl EBXR8 482 rwkw..
Daily driver GTE FG..
Projects http://www.fordforums.com.au/showthread.php?t=107711
http://www.fordforums.com.au/showthr...8+turbo&page=4
ebxr8240 is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 09:14 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL