Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > General Topics > The Pub

The Pub For General Automotive Related Talk

Reply
 
Thread Tools Display Modes
Old 26-08-2010, 12:48 PM   #1
Bushbasher
When in doubt, GAS IT!!
 
Bushbasher's Avatar
 
Join Date: Sep 2006
Location: Lower Eyre Peninsula, SA
Posts: 3,018
Default Outstanding service!!

I hope this is ok to put up, if not, please, one of the mods, by all means delete it. Having said that, I think good, no, GREAT service deserves recognition.


I'd just like to take this opportunity to publically thank and recommend a bloke and his business for the unbelievably outstanding service he has afforded me today. But first a little background.

I went to get my AU Fairlane pink slipped last week and discovered my ABS module had an issue, the light was on and it wouldn't communicate with the laptop for diagnosis. Apparently this is not uncommon for AU traction control versions of the ABS module. After asking in the AU forum for help in solving my problem Macman supplied a link to a bloke called Antony Pazin of Specialized Automotive Electronics in Parramatta. I sent my ABS module to him by express post on monday afternoon and had it promptly back in my post box wednesday morning apparently all fixed. I plugged it back in and it appeared to work so I reassembled the ABS and put the car back together only to see the light come on again. Off I went to the ford dealer to see if the module would communicate to the laptop now, which it did, only to pull up an internal error code for the module. Back home and on the phone to Antony and the conversation went something like this ;

Me - " the unit is talking to the laptop now but it's saying there's an internal error"

Antony - "Oooohh, that's not good, that usually means you need a new module"

Me - ,OH CRAP!! "so I just wasted $250 for nothing"

Antony - "no mate, that's ok, if it doesn't work I won't charge you"

Me - " thanks mate. I don't suppose you have one I could buy by any chance?"

Antony - " no but I'll make a couple of calls and see if I can find one for you no problem, give me your number I'll call you back"

Me - " mate , that's great, I really appreciate that thanks"

less than 5 minutes later the phone rings ;

Antony - " I got one organized, it'll be sent over to me so I can check the serial number is right before I send it to you"

Me - "sweet, do I pay you or do I pay the other guy direct?"

Antony - " No, just pay me like you were going to. I'll open it up and do the mod to make sure it doesn't fail and send it out express today so you'll have it tomorrow"

Me - " Antony, you're a bloody legend, how much do I owe you?"

Antony - " no worries, just pay the same amount you were going to pay for the other one she'll be right"


At that point I would have kissed him if I could have.

So Thank you Mr Antony Pazin of Specialized Automotive Electronics in Parramatta for not only your outstandingly speedy turn around time in the first instance but your truly legendary service above and beyond the call of duty. I am indebted to you and can't praise and recommend you and your business highly enough, thank you, thank you, thank you.

Bushbasher

__________________
.





HERS- BFIII Wagon Gold, alloys, dual fuel, bullbar, big tow pack, trans cooler, fully rebuilt HD suspension, Clarion, alarmed, full 2 1/2" sports system, mint body

MINE- AUII Forte
Meteorite, dual fuel but otherwise bog stock.

MINE- AUII Fairlane Sportsman Liquid Silver over meteorite,HIDs', Airhog, Eagle Leads, dual fuel, custom rear springs, BA slotted discs + a second one for spares

.
Bushbasher is offline   Reply With Quote Multi-Quote with this Post
8 users like this post:
Old 26-08-2010, 12:51 PM   #2
stockNAfairlane
Regular Member
 
Join Date: Aug 2005
Posts: 154
Default

Sweet, good to hear some decent service being offered.
stockNAfairlane is offline   Reply With Quote Multi-Quote with this Post
Old 26-08-2010, 06:08 PM   #3
russellw
Chairman & Administrator
Donating Member3
 
russellw's Avatar
 
Join Date: Dec 2004
Location: 1975
Posts: 106,470
Community Builder: In recognition of those who have helped build the AFF community. - Issue reason: Raptor: For Continued, and prolonged service to the wider Ford Community 
Default

It is pleasing to hear that there are still some people dedictaed to maintaining high standards of customer service and equally nice to see it raised publicly.

Cheers
Russ
__________________

__________________________________________________

Observatio Facta Rotae


russellw is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 26-08-2010, 07:45 PM   #4
Yellow_Festiva
Where to next??
 
Yellow_Festiva's Avatar
 
Join Date: Oct 2006
Location: Sydney
Posts: 8,914
Default

Good story.

Seems good customer service is still in fashion.

Perhaps a sticky in applicable sub-sections that mentions state by state reputable places to get work done (based on direct experiances from forum members as above).

I have just had 2 lots of major work done myself on 2 cars where both shops could have easily inflated the final price (or the problems found) and was very much surprised when both bills came it at right on the initial 'rough quote', even though both jobs had a degree of trial and error / investigative work.

Jason
Yellow_Festiva is offline   Reply With Quote Multi-Quote with this Post
Old 26-08-2010, 07:57 PM   #5
Mad Maxine
Regular Member
 
Mad Maxine's Avatar
 
Join Date: Jan 2010
Location: Brisbane
Posts: 250
Thumbs up

I would also like to relate a great customer service experience I had recently at O'Brien Glass (the windscreen mob) at Geebung in Brisbane.

I rang them to see if they could attach my rear view mirror, as I didn't want to do a half-arsed job using the cheap products over the counter. I ended up speaking with three different people, but eventually got through put on to a lovely lady named Marion, who said 'come over and we can do that for you no worries'.

So, I jumped in the Coupe, got to O'Brien Glass, and a chap named Dave came out, removed the old adhesive, checked my mirror was OK (it was a replacement one from the wreckers, as the old one fell onto the transmission lever of course, and smashed), and put it on pretty much straight away.

When I went in to pay, Marion said "No charge" - I nearly fell over. In appreciation, I took a photo of Dave in the Coupe (plus another chap who was practically drooling over her from his desk in the front office!) and told them their excellent service would be repaid in good press, and since this seems like a good opportunity, here it is!



It made for an excellent Saturday!

Shazz
__________________
Mad Maxine: Pray that she's out there...... somewhere

1977 XC GS Coupe
Mad Maxine is offline   Reply With Quote Multi-Quote with this Post
3 users like this post:
Old 26-08-2010, 08:33 PM   #6
duaned
FF.Com.Au Hardcore
 
duaned's Avatar
 
Join Date: Jan 2005
Location: Lake Macquarie, Newcastle NSW
Posts: 3,167
Default

That's great service from O'brien's, many of us now may put them first on the list for window needs in the future. And damn, what a hot coupe!
duaned is offline   Reply With Quote Multi-Quote with this Post
Old 26-08-2010, 08:52 PM   #7
russellw
Chairman & Administrator
Donating Member3
 
russellw's Avatar
 
Join Date: Dec 2004
Location: 1975
Posts: 106,470
Community Builder: In recognition of those who have helped build the AFF community. - Issue reason: Raptor: For Continued, and prolonged service to the wider Ford Community 
Default

I'm going to stick this thread and place it somewhere that it can be seen and added to by others with positive experiences.

Cheers
Russ
__________________

__________________________________________________

Observatio Facta Rotae


russellw is offline   Reply With Quote Multi-Quote with this Post
Old 30-08-2010, 09:15 PM   #8
mik
FF.Com.Au Hardcore
 
mik's Avatar
 
Join Date: Feb 2005
Location: Melb north
Posts: 12,049
Default

i can add to this i think, a bloke i`ve been to many times now for metal coatings, heat proof coatings, he also does blasting of different types and is an absolute proffesional, Andrew of competition coatings in Coburg(Melbourne), to give an idea the sort of bloke he is, one of the jobs given him was some exhaust bits to get blasted and coated, after blasting, some of our welds were found wanting with a heap of pin holes, he could have rang and said i can`t finish the job it needs welding, or he could have just did the coating, instead he took time to reweld the dodgey area`s and finish the job, and then charged no extra for it.
the bloke is not short of work so don`t expect to drop an item in today and expect it tommorow, but is well worth the wait imo.
Andrew of Competition Coatings(the Blast factory) 10 audrey ave nth coburg ph 03 9354 8021
mik is offline   Reply With Quote Multi-Quote with this Post
Old 30-08-2010, 09:30 PM   #9
4Vman
FF.Com.Au Hardcore
 
4Vman's Avatar
 
Join Date: Jan 2005
Posts: 14,672
Default

Etheridge Ford,

Just had the FG in for its 15000k service and attention to a few QC issues and they went above and beyond to not only fix them but fully detail the car to brand new, i mean BRAND NEW.

Great Job Andrew and the team..



__________________
335 S/C GT: The new KING of Australian made performance cars..
4Vman is offline   Reply With Quote Multi-Quote with this Post
Old 30-08-2010, 09:52 PM   #10
Cashie
FF.Com.Au Hardcore
 
Cashie's Avatar
 
Join Date: Dec 2004
Location: Perth
Posts: 1,801
Technical Contributor: For members who share their technical expertise. - Issue reason: Multiple helpful contributions throughout the tech area. 
Default

FTG

I can vouch for Darren at FTG...
Over the years I have purchased many items from FTG and have always received excellent service and pricing.
__________________
Current Rides:
2017 Ford Mustang
2020 Ford Everest Sport

Past Rides:
2017 Kia Stinger GT
2008 FG XR6 Sedan
2008 FG G6E Sedan
2004 BA XR8 Sedan
2008 BF XR6 Turbo Sedan
2004 BA XR8 Sedan
2003 BA XR8 Ute
2003 BA XR6 Sedan
Cashie is offline   Reply With Quote Multi-Quote with this Post
Old 30-08-2010, 09:56 PM   #11
Iggypoppin'
Chasing a FORD project!
 
Iggypoppin''s Avatar
 
Join Date: Jul 2008
Location: adelaide
Posts: 5,127
Default

Back in the day, had two windows smashed on the XR6, had instant windscreens on the phone the next day, they took pity on me, as one of the guys had a BA XR8, did me $100 off the total price and fast tracked it to within two days.
Couldn't have been happier with the service.
The job was very well done too.
Instant windscreens Edwardstown
__________________
Quote:
Originally Posted by HSE2
Today we might get beaten at some of our own game. Tomorrow we reinvent it.
Game. Reinvented.

1996 BMW 740iL V8. TV, phone, leather, sunroof, satnav, all as standard. Now with 19" TSW Brooklands, 2 1/2" stainless steel exhaust, plus more coming soon.
Iggypoppin' is offline   Reply With Quote Multi-Quote with this Post
Old 17-12-2010, 04:34 PM   #12
ZA-289
FF.Com.Au Hardcore
 
ZA-289's Avatar
 
Join Date: Mar 2006
Location: Adelaide
Posts: 2,345
Default

Quote:
Originally Posted by Iggypoppin'
Back in the day, had two windows smashed on the XR6, had instant windscreens on the phone the next day, they took pity on me, as one of the guys had a BA XR8, did me $100 off the total price and fast tracked it to within two days.
Couldn't have been happier with the service.
The job was very well done too.
Instant windscreens Edwardstown

These guys did a great job tinting my BA for a great price also. Car was ready within 2 hours.
ZA-289 is offline   Reply With Quote Multi-Quote with this Post
Old 18-05-2018, 04:28 PM   #13
CairnsXCGXL
Regular Member
 
Join Date: Aug 2015
Posts: 55
Default Re: Outstanding service!!

Big thanks to the wonderful service from our member @vdo, great help and went above and beyond to help with my tacho. Really appreciate and highly recommend.
CairnsXCGXL is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 19-05-2018, 09:16 AM   #14
roddy1960
Donating Member
Donating Member2
 
roddy1960's Avatar
 
Join Date: Dec 2014
Location: St Marys Tasmania
Posts: 3,562
Default Re: Outstanding service!!

Big thanks to good old EBAY . I rang two local Ford dealership parts departments in the past week for the following .

Gas Struts for AU Falcon with spoiler and the pivot studs .

Best price for the struts was $140 and for the pivot ball only , not the stud as they're no longer available was $13 excluding postage . Hmmm.

Got on EBAY ,. Found the gas struts to suit Ford Falcon AU 1-2-3 built between 1998 and 2002 for sedan and for those with the spoiler for , wait for it , wait for it .......$35 , free postage too . Then I found the 10mm studs and pivot balls for $5.75 for 6mm thread or 8mm thread , so I got a pair of both for the same cost as what Ford wanted for the pivot ball only wqhich is useless anyway without the stud . I'd already sourced two new steering dust boots for same Falcon via EBAY for $18 for the pair and free postage .

Yesterday they arrived , so did the gas struts ant the pivots should be here Monday according to the tracking info .

This morning I tried one of the gas struts on the yet to let go side of the boot lid and fits into the ball socket fine behind the retaining clips . Although a bit of sloppiness that's due to the buggered pivot ball that's slightly better than the broken one on the other side . The new one will fit fine .

This is why Ford ****s me so often with the prices and growing frustration but faith restored when many items not specifically genuine required can be found via online retail or outright EBAY etc ...
roddy1960 is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 19-05-2018, 12:29 PM   #15
roddy1960
Donating Member
Donating Member2
 
roddy1960's Avatar
 
Join Date: Dec 2014
Location: St Marys Tasmania
Posts: 3,562
Default Re: Outstanding service!!

To be fair to Ford (re my previous post) one of the guys at Tilford (Hobart) did give me the part numbers for genuine / cross reference etc.

Pivot ball is EFF43634A

Stud is V800241536D but was told no longer likely available

Spoiler compliant gas strut AU sedan 1998-2002 is ERF406A10B

Just incase anyone wants to track down genuine parts for boot lid issues .

So , I was happy about that via the chap at Tilford ..
roddy1960 is offline   Reply With Quote Multi-Quote with this Post
Old 19-05-2018, 05:46 PM   #16
GTLEGEND
FF.Com.Au Hardcore
 
Join Date: Mar 2013
Posts: 7,471
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Every advice post I visit where OP are seeking advice for their new vehicle, he is there and adds valuable support and advice for rectifying the problem. Really is a Legend. Technical Contributor: For members who share their technical expertise. - Issue reason: The quality of information he provides is in depth and highly valued by those posting questions. 
Default Re: Outstanding service!!

Quote:
Originally Posted by roddy1960 View Post
Big thanks to good old EBAY . I rang two local Ford dealership parts departments in the past week for the following .

Gas Struts for AU Falcon with spoiler and the pivot studs .

Best price for the struts was $140 and for the pivot ball only , not the stud as they're no longer available was $13 excluding postage . Hmmm.

Got on EBAY ,. Found the gas struts to suit Ford Falcon AU 1-2-3 built between 1998 and 2002 for sedan and for those with the spoiler for , wait for it , wait for it .......$35 , free postage too . Then I found the 10mm studs and pivot balls for $5.75 for 6mm thread or 8mm thread , so I got a pair of both for the same cost as what Ford wanted for the pivot ball only wqhich is useless anyway without the stud . I'd already sourced two new steering dust boots for same Falcon via EBAY for $18 for the pair and free postage .

Yesterday they arrived , so did the gas struts ant the pivots should be here Monday according to the tracking info .

This morning I tried one of the gas struts on the yet to let go side of the boot lid and fits into the ball socket fine behind the retaining clips . Although a bit of sloppiness that's due to the buggered pivot ball that's slightly better than the broken one on the other side . The new one will fit fine .

This is why Ford ****s me so often with the prices and growing frustration but faith restored when many items not specifically genuine required can be found via online retail or outright EBAY etc ...
Agree and disagree, its good to see aftermarket components available when genuine is obsolete. From my history, the cheaper ones that although fit don't seem to last as long as the genuine, speaking in general terms that is, not specific to gas struts (front wheel bearing on a AU for an example).

I hope I am wrong in your case and that your purchase is a good one, but most times the genuine one is dearer for a good reason, but best to check as sometimes the genuine is cheaper also.
GTLEGEND is online now   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 20-05-2018, 11:30 AM   #17
roddy1960
Donating Member
Donating Member2
 
roddy1960's Avatar
 
Join Date: Dec 2014
Location: St Marys Tasmania
Posts: 3,562
Default Re: Outstanding service!!

Quote:
Originally Posted by GTLEGEND View Post
Agree and disagree, its good to see aftermarket components available when genuine is obsolete. From my history, the cheaper ones that although fit don't seem to last as long as the genuine, speaking in general terms that is, not specific to gas struts (front wheel bearing on a AU for an example).

I hope I am wrong in your case and that your purchase is a good one, but most times the genuine one is dearer for a good reason, but best to check as sometimes the genuine is cheaper also.
Thanks ...I see your point .. With certain things , no compromise such as brake components , transmission stuff , drivetrain items etc but the dust boots I got came from a company called CV Joints Pty.Ltd Australia via their EBAY facility .On inspection they look perfectly fine but only time will tell if they let go any sooner to the original ones .

The gas struts if they fail fairly quickly it's only $35 down the drain but if they last several years it'll be a bonus . A lottery is correct . The studs though cannot be got from Ford so I was told although the pivots can be . Like a ship without a deck !!!!!...so to find the complete stud/pivot although there are two different threads I bought both , 6mm and 8mm was good . Got to drill and tap or weld anyway because the original surrounds are corroded to buggery , common fault apparently as it turns out .

Genuine v non genuine . About 7-8 years ago I bought a new Panasonic DV Camera but came with only a single battery . I rang the Authorised Panasonic dealer not too far from me and was told a second battery would cost $230 .

We have a crowd called Every Battery in Launceston who source all sorts of batteries for all sorts of things so I rang them . I was astounded to be told that they could provide the same battery , made by a licenced under Panasonic (Japanese company) with same 7.2V rating for $92 including postage . The salesman told me that the only difference was it wouldn't have the Panasonic logo on it . I use that camera to this day a lot and both batteries are still working and recharge the same . In that instance I could have paid $138 more for essentially the exact same item .

I think that this happens more and more over time .

Last edited by roddy1960; 20-05-2018 at 11:37 AM.
roddy1960 is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 30-08-2010, 11:23 PM   #18
GORDZ
OMGORDZ
 
GORDZ's Avatar
 
Join Date: Jun 2007
Location: SE, Melbourne
Posts: 2,357
Default

I got outstanding service from Budget rent-a-car in geelong a couple of months back. Gave me a truck for the day, gave me an over 25 yearold pricing, half price insurance and let me leave my ute in their park for the whole day. Was just very friendly and chatty and great to deal with. Cant remember her name but she'd have been late 20's, tattood, blonde lady. Kudos!
GORDZ is offline   Reply With Quote Multi-Quote with this Post
Old 31-08-2010, 01:20 AM   #19
BomberXR
Regular Member
 
BomberXR's Avatar
 
Join Date: Mar 2005
Posts: 365
Default

Quote:
Originally Posted by GORDZ
I got outstanding service from Budget rent-a-car in geelong a couple of months back. Gave me a truck for the day, gave me an over 25 yearold pricing, half price insurance and let me leave my ute in their park for the whole day. Was just very friendly and chatty and great to deal with. Cant remember her name but she'd have been late 20's, tattood, blonde lady. Kudos!

sounds like she was keen on ya mate..... . I got some excellent service last 2 times I have bought (42 inch Plasma and Blu ray player) from the Good Guys at Highpoint, go see Roman..older guy around 60. Great prices and very positive, old fashioned customer service.
BomberXR is offline   Reply With Quote Multi-Quote with this Post
Old 31-08-2010, 04:01 AM   #20
Paull
P6 LTD
 
Paull's Avatar
 
Join Date: Feb 2005
Location: Perth
Posts: 3,288
Technical Contributor: For members who share their technical expertise. - Issue reason: For all the hard work performed around paint, trim, engine codes in the Classics section. General all round knwoledge and willingness to impart on others 
Default

O'Brien Glass - Malaga WA.

The person that fitted the new windscreen was an absolute proffesional (Simon), great bloke to have a chat with and removed the old screen with little to no damage. No broken glass (small or large) found its way into the car and the new screen was a perfect fit.

Very very happy and will use this Company again and again.
Paull is offline   Reply With Quote Multi-Quote with this Post
Old 01-09-2010, 05:29 PM   #21
Sorted
OzEcruisers PRESIDENT
 
Sorted's Avatar
 
Join Date: Mar 2005
Location: Melbz
Posts: 15,770
Community Builder: In recognition of those who have helped build the AFF community. - Issue reason: For all the contributions you make to the AFF community. 
Default

PACEMAKER

Purchased Pacemaker 4480 Competition Extractors 02/09/2008
Where Number 1 and 6 Pipes join the Weld Cracked 15/07/2010
Pacemaker replacing them no hassle's as the extractors have a 2 year Warranty

Glad i went with the name brand rather than some cheap eBay copy
__________________
1994 Ford Fairmont EF NA 6cyl Man 3.9 diff Sedan
PROEF 13.46 @ 105.78mph

Tuned by DYNOMOTIVE

200BUX - AFF Drag Nats 2019 EF Wagon
Quote:
Originally Posted by rednose View Post
Common knowledge that the more weight you take out of the car the less power you need to run the time.
Sorted is offline   Reply With Quote Multi-Quote with this Post
Old 19-09-2010, 09:01 AM   #22
EB#
FF.Com.Au Hardcore
 
EB#'s Avatar
 
Join Date: Feb 2007
Location: North Coast, NSW
Posts: 4,020
Technical Contributor: For members who share their technical expertise. - Issue reason: Constant helpful advice and step by step guides in easy to understand format with pictures. 
Default

Lismore Automatic Transmission Service

This is the place where I get my trans serviced on the BA, but on a couple
of occasions I've needed an engine oil/filter change on short notice.
The phone conversations usually work like this:

Me: Hi Rod, I need an oil change, can I bring the car down some time and use the hoist ?
Rod: Sure, the hoist is available at the moment, what are you up to now ?
Me: I'll be there in 5 minutes.
Rod: No problems, I have oil and filters ready to go.

The car gets an oil change service, we chat about Fords and such (Rod has two of them),
and I sort Rod out for time/expenses. It's an easy paced hour or so, excellent value for money, good company and a few laughs.

That is good old fashioned service.
EB# is offline   Reply With Quote Multi-Quote with this Post
Old 29-09-2010, 01:04 AM   #23
davessleepin351
anti-zombie specialist
 
davessleepin351's Avatar
 
Join Date: Sep 2010
Location: Barossa Valley
Posts: 260
Default

For Mechanical work of all types in Adelaide i have had great service and help from Michael at Saints tyre and auto. He has worked on such cars of mine as Mitsubishi Cordia VR4, Ford EBII Gli, Ford EBII Xr6, Ford BA Xr6 T, Lexus LS400, Holden VR SS, Holden VS Exec, and my XE 351 Falcon. He has won the best small business award a few years in a row now and it shows. Has always gone the extra mile with all jobs ive had him do from full rebuilds to basic maintenance and suspension work.
__________________
408 Stroker 4 bolt half grouted cleveland, solid roller cam over 730" lift, CHI 225 heads CHI intake, Holley Ultra HP 950 and no stereo.
davessleepin351 is offline   Reply With Quote Multi-Quote with this Post
Old 29-09-2010, 01:08 AM   #24
davessleepin351
anti-zombie specialist
 
davessleepin351's Avatar
 
Join Date: Sep 2010
Location: Barossa Valley
Posts: 260
Default

If ure in the barossa valley and your fords a bit hot under the collar give Scot from Barossa Radiators a call, he's a big ford fan (has a ba gt i believe) and treats em like gold. only sells good gear and knows just what each model likes. Even machined up a custom thermostat for my eb xr6.
__________________
408 Stroker 4 bolt half grouted cleveland, solid roller cam over 730" lift, CHI 225 heads CHI intake, Holley Ultra HP 950 and no stereo.
davessleepin351 is offline   Reply With Quote Multi-Quote with this Post
Old 29-09-2010, 09:22 AM   #25
Mechan1k
Moderator
Donating Member1
 
Mechan1k's Avatar
 
Join Date: Feb 2005
Location: Kenthurst
Posts: 40,417
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Brings a wealth of knowledge to the forums and is frequently giving helpful advice. Technical Contributor: For members who share their technical expertise. - Issue reason: Always willing to help out with technical information. 
Default

Winford Ford Mcgraths Hill, NSW

They have been excellent within warranty and out of warranty as well. Up front with pricing ... and if it went overtime ... was not charged extra for it. Warranty work was accepted where thing needed replacing (and other items that I didn't expect to be covered either.)

No job was too hard for them ... they have looked after me and will go back there again for sure.

Crescent Motorsport Liverpool
Joe has looked after my vehicle since i was introduced to him by a friend. Nice bloke ... always tells you straight up what needs to be done. Guarantee his work 100%. One of those mechanics that are hard to find.

Adam Gorrell Auto Electrical, Mcgraths Hill
A1 work ... nice guys ... nice premises as well ... for a basic job it was done really nice ... with pretty much all cabling hidden and vehicle cleaned after work completed.
Mechan1k is offline   Reply With Quote Multi-Quote with this Post
Old 29-09-2010, 02:02 PM   #26
XWGT
Powered by Marshall
 
XWGT's Avatar
 
Join Date: Jan 2005
Posts: 1,139
Default

Ballarat Toyota
Whislt in for a service it was noted there was a leaking input shaft seal and it was arranged to be fixed under warranty.

I dropped the car in.....and was called to say the parts had arrived but they were incorrect so they would source the correct ones.

They then stated that as I had already been incovenienced by dropping my car in, that when the correct parts arrived they would send a technician to my house to fit the new parts. (30klm away)

I declined the offer and had it done in the shop but it was definately going "above and beyond" to satisfy the customer. I really appreciated it.
__________________
Powered by Marshall
XWGT is offline   Reply With Quote Multi-Quote with this Post
Old 23-10-2010, 04:51 PM   #27
fos408
Regular Member
 
Join Date: Jun 2006
Location: Sydney
Posts: 123
Default Mona Vale Sydney

I want to recommend a couple of people who do work om my cars . ANA Electrical and Mechanical. I started to take a few things to Shaun when I first moved here a couple of years ago an now trust him with my XR and everything on my Exploder as well thye other cars in the family. Always does a great job and doesn't rip you off. Also drives a nicely modded Fg ute which helps.
And Saab Tech,yeh yeah , I know its the missus car ,at least it is a convert, they are also bloody great to deal with ,nothing is ever too much trouble, fit you in asap ,loan car, again good pricing. Thanks
fos408 is offline   Reply With Quote Multi-Quote with this Post
Old 23-10-2010, 09:20 PM   #28
Mad Maxine
Regular Member
 
Mad Maxine's Avatar
 
Join Date: Jan 2010
Location: Brisbane
Posts: 250
Default

I hope you mean 'Explorer' Fos! ;)
__________________
Mad Maxine: Pray that she's out there...... somewhere

1977 XC GS Coupe
Mad Maxine is offline   Reply With Quote Multi-Quote with this Post
Old 25-10-2010, 06:07 PM   #29
Valid8
COOGES
 
Valid8's Avatar
 
Join Date: Jul 2008
Location: Berwick Vic
Posts: 1,207
Default Original Parts Group

I had a pleasureable experience whilst buying an alloy washer bottle on Ebay from Original Parts Group. The inlet tube on my old washer pump was too big for the outlet on the new bottle, so I called the mobile number on the invoice, spoke to Fab and to my amazement he said that he wants only happy customers and has posted me at no cost a new washer pump to suit the new bottle. Cant beat good customer service, so good on ya Fab, good on ya OPG.
__________________
COOGES- FG 50th ANNIVERSARY XR6T MANUAL / 1965 BUICK RIVIERA
Valid8 is offline   Reply With Quote Multi-Quote with this Post
Old 24-07-2011, 09:55 PM   #30
potsyfromparkes
Regular Member
 
Join Date: Jul 2009
Location: Parkes
Posts: 178
Default Re: Original Parts Group

Quote:
Originally Posted by Valid8
I had a pleasureable experience whilst buying an alloy washer bottle on Ebay from Original Parts Group. The inlet tube on my old washer pump was too big for the outlet on the new bottle, so I called the mobile number on the invoice, spoke to Fab and to my amazement he said that he wants only happy customers and has posted me at no cost a new washer pump to suit the new bottle. Cant beat good customer service, so good on ya Fab, good on ya OPG.
And the belowmentioned guy is the goods for NGK tr55ix spark plugs @ $12.oo each for 2005 BF XR8.Based in melbourne,ordered 8 plugs on his Ebay site (harold-performancelub);plugs arrived in Parkes;NSW two days later,full price $96.00(no postage/no handling fees).Harold supplies his mobile No. if you have any queries; and is a genuinely nice guy to talk to.

Local Repco dealer wanted $25.00 a spark plug and another spare parts place in Parkes wanted $20.00

I know some say that u can get them cheaper from the states but for local service and delivery time Harold is good. Great service!!!!!
potsyfromparkes is offline   Reply With Quote Multi-Quote with this Post
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 09:26 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL