Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 29-06-2011, 01:27 PM   #1
zakjames
Regular Member
 
zakjames's Avatar
 
Join Date: Feb 2011
Location: Brisbane
Posts: 143
Default NEw springs, now one side is lower then the other!?!

Hey all, have installed SL Kings on the rear of my IRS AU XR6 and now my RHR sits higher then the left?

Measurements are
LHR - 620mm from ground to wheel arch
RHR - 650mm from ground to wheel arch

This has me completely buggered as why would NEW springs have a difference of 30mm seating?

Anyone have any ideas? I know for a fact the shocks are'nt in terrific condition but this shouldnt effect it should it? also I know the RHR control arms are probably [B]slightly[B] bent but again this shouldnt effect it?

Any help is greatly appreciated before I pull it all apart again to try and spot anything.


- Also like an idiot I didnt measure the ride height before installing the springs so I am unsure if there was a difference or not beforehand, fromt memory it was equal to the eye


Last edited by zakjames; 29-06-2011 at 01:35 PM.
zakjames is offline   Reply With Quote Multi-Quote with this Post
Old 29-06-2011, 01:48 PM   #2
Cam
Stroking it...
 
Cam's Avatar
 
Join Date: May 2005
Location: The 'butt
Posts: 2,844
Default Re: NEw springs, now one side is lower then the other!?!

Spring seated correctly?
Cam is offline   Reply With Quote Multi-Quote with this Post
Old 29-06-2011, 02:01 PM   #3
BadMax
FF.Com.Au Hardcore
 
Join Date: Sep 2009
Posts: 1,316
Default Re: NEw springs, now one side is lower then the other!?!

Is there a left and right spring? It's quite common for the right hand side to sit slightly higher to compensate for the driver.
Also, don't measure from the ground, measure guard lip to centre of the hub.
__________________
2015 FG-X XR6 Turbo Ute
Silhouette.
ZF.
Single hump hard lid.
XR8 Bonnet
Colour coded mirrors.
Tint.
Reverse camera.
K&N.
More down the track...
BadMax is offline   Reply With Quote Multi-Quote with this Post
Old 29-06-2011, 02:05 PM   #4
anto
Za Dom spremni
 
anto's Avatar
 
Join Date: Dec 2005
Location: Adelaide
Posts: 1,759
Default Re: NEw springs, now one side is lower then the other!?!

when i had my super lows put in my XR8 the same happend..it settled after a while. Its supposedly to cater for the drivers weight
__________________
2017 red mustang GT manual
XB coupe 351 4spd sunroof onyx black
XBGT 4 door Sunroof apollo blue
AU III XR8 red ute
anto is offline   Reply With Quote Multi-Quote with this Post
Old 29-06-2011, 02:07 PM   #5
atec77
FF.Com.Au Hardcore
 
Join Date: Sep 2005
Location: Brisbane
Posts: 3,568
Default Re: NEw springs, now one side is lower then the other!?!

Quote:
Originally Posted by zakjames
Hey all, have installed SL Kings on the rear of my IRS AU XR6 and now my RHR sits higher then the left?

Measurements are
LHR - 620mm from ground to wheel arch
RHR - 650mm from ground to wheel arch

This has me completely buggered as why would NEW springs have a difference of 30mm seating?

Anyone have any ideas? I know for a fact the shocks are'nt in terrific condition but this shouldnt effect it should it? also I know the RHR control arms are probably [B]slightly[B] bent but again this shouldnt effect it?

Any help is greatly appreciated before I pull it all apart again to try and spot anything.


- Also like an idiot I didnt measure the ride height before installing the springs so I am unsure if there was a difference or not beforehand, fromt memory it was equal to the eye
It will be longer one side to cater for you , give it a week and if it is still off swapsys
atec77 is offline   Reply With Quote Multi-Quote with this Post
Old 29-06-2011, 02:20 PM   #6
zakjames
Regular Member
 
zakjames's Avatar
 
Join Date: Feb 2011
Location: Brisbane
Posts: 143
Default Re: NEw springs, now one side is lower then the other!?!

sweet thanks everyone for the quick assistance. Will check again next week and will report my findings.
Thanks again.
zakjames is offline   Reply With Quote Multi-Quote with this Post
Old 29-06-2011, 10:57 PM   #7
WannabeXP
Regular Member
 
WannabeXP's Avatar
 
Join Date: Jan 2010
Location: Warrnambool, Vic
Posts: 266
Default Re: NEw springs, now one side is lower then the other!?!

Quote:
Originally Posted by Cam
Spring seated correctly?
I'd say Cam is on the money!
__________________
WANTED: MOMO Metallic blue steering wheel and Manual gearknob! PM Please!!
Stevo
_____________________________________
05/2000 AUII XR6 5sp|Pacemaker 4480 Competition Headers|Lukey catback|Tickford Azzuro's|Impco LPG Conversion
WannabeXP is offline   Reply With Quote Multi-Quote with this Post
Old 29-06-2011, 11:07 PM   #8
fasty73
FF.Com.Au Hardcore
 
fasty73's Avatar
 
Join Date: Apr 2011
Posts: 521
Default Re: NEw springs, now one side is lower then the other!?!

Quote:
Originally Posted by BadMax
Is there a left and right spring? It's quite common for the right hand side to sit slightly higher to compensate for the driver.
Also, don't measure from the ground, measure guard lip to centre of the hub.
They are designed to be level with the driver seated in the car. plus one for the above post.
__________________
Love Fords so much, I named my son Ford!!!
fasty73 is offline   Reply With Quote Multi-Quote with this Post
Old 01-07-2011, 05:45 PM   #9
Day-mow
rexnet
 
Day-mow's Avatar
 
Join Date: Feb 2010
Location: Whybother, South Australia
Posts: 3,557
Default Re: NEw springs, now one side is lower then the other!?!

mine sat level :\
30 mm is decent
__________________
MY06 WRX Build Not Bought
Collingrove Hill Climb- 38.79

Remember it is the internet,So beware of trolls, If you argue with trolls the kids will laugh at you

Follow me on twitter @ Day_mow
Day-mow is offline   Reply With Quote Multi-Quote with this Post
Old 03-07-2011, 12:15 PM   #10
TUF-640
Regular Member
 
TUF-640's Avatar
 
Join Date: Feb 2008
Location: Geelong
Posts: 477
Default Re: NEw springs, now one side is lower then the other!?!

Quote:
Originally Posted by anto
Its supposedly to cater for the drivers weight
thats good to know a year down the track...the shop that fitted my sl rears put the l/h one on the right and vice versa...lucky i put the tickford springs back in coz that shop is pretty dodgy..not to name names *cough* tyre factory *cough* hahah
__________________
Daily: 2003 BA Fairmont Ghia - Mercury Silver | Sunroof | Tint | XR6T 3.46 LSD

Project: 2001 AU II Fairmont Silhouette | Optioned 17" Tickford wheels + Sports suspension | Tint

Weekender: 1989 NA II Fairlane - Rosewood | Standard (with functioning SLS!)

Quote:
Originally Posted by Mr Hardware

Just remember gents, anyone can follow fashion, but it takes someone with real class and finesse to have Style.
TUF-640 is offline   Reply With Quote Multi-Quote with this Post
Old 04-07-2011, 09:18 AM   #11
Day-mow
rexnet
 
Day-mow's Avatar
 
Join Date: Feb 2010
Location: Whybother, South Australia
Posts: 3,557
Default Re: NEw springs, now one side is lower then the other!?!

There's a left and right?
I must have winged it then
__________________
MY06 WRX Build Not Bought
Collingrove Hill Climb- 38.79

Remember it is the internet,So beware of trolls, If you argue with trolls the kids will laugh at you

Follow me on twitter @ Day_mow
Day-mow is offline   Reply With Quote Multi-Quote with this Post
Old 07-07-2011, 08:42 PM   #12
JC
Miami Pilot
Donating Member2
 
JC's Avatar
 
Join Date: Jan 2005
Location: ACT
Posts: 21,701
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default Re: NEw springs, now one side is lower then the other!?!

Same thing happened to GKs wagon when we threw a set of AWD Territory front springs in it today.

__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb)
1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs).
Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s

Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings

FPV 335 build stats: <click here>

Ford Performance Club ACT
JC is offline   Reply With Quote Multi-Quote with this Post
Old 07-07-2011, 08:45 PM   #13
JC
Miami Pilot
Donating Member2
 
JC's Avatar
 
Join Date: Jan 2005
Location: ACT
Posts: 21,701
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default Re: NEw springs, now one side is lower then the other!?!

Same thing happened to GKs wagon when we threw a set of AWD Territory front springs in it today.

__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb)
1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs).
Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s

Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings

FPV 335 build stats: <click here>

Ford Performance Club ACT
JC is offline   Reply With Quote Multi-Quote with this Post
Old 07-07-2011, 10:05 PM   #14
Day-mow
rexnet
 
Day-mow's Avatar
 
Join Date: Feb 2010
Location: Whybother, South Australia
Posts: 3,557
Default Re: NEw springs, now one side is lower then the other!?!

i dont think its high enough :\
__________________
MY06 WRX Build Not Bought
Collingrove Hill Climb- 38.79

Remember it is the internet,So beware of trolls, If you argue with trolls the kids will laugh at you

Follow me on twitter @ Day_mow
Day-mow is offline   Reply With Quote Multi-Quote with this Post
Old 07-07-2011, 10:09 PM   #15
zakjames
Regular Member
 
zakjames's Avatar
 
Join Date: Feb 2011
Location: Brisbane
Posts: 143
Default Re: NEw springs, now one side is lower then the other!?!

will be re-measuring saturday n depending on what i get will be swapping springs side for side.
thanks again everyone
zakjames is offline   Reply With Quote Multi-Quote with this Post
Old 12-07-2011, 08:37 PM   #16
GK
Walking with God
 
GK's Avatar
 
Join Date: Mar 2005
Location: Melbourne
Posts: 7,321
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Wink Re: NEw springs, now one side is lower then the other!?!

Quote:
Originally Posted by JC
Same thing happened to GKs wagon when we threw a set of AWD Territory front springs in it today.

Why are you posting pics of my beautiful, clean AU? LOL!

GK
__________________
2009 Mondeo Zetec TDCi - Moondust Silver

2015 Kia Sorento Platinum - Snow White Pearl

2001 Ducati Monster 900Sie - Red

Now gone!
1999 AU1 Futura Wagon - Sparkling Burgundy
On LPG



Want a Full Life? John 10:10
GK is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 02:15 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL