|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
16-11-2021, 06:29 PM
|
#1 | ||
|
PS13 K'S
Join Date: Aug 2007
Posts: 257
|
Hi guys, did a little research on this but didnt really find what i was looking for so figured id ask here,
i have a 2000 Series 2 AU falcon ute factroy 5L v8 auto, engines getting a little tired, so i picked up a Sep 99 series 1.5 AU xr8 sedan thats manual, without doing as much research as i should have. now my question is snice the sedan has smart sheild, would i get away with swapping the manual Ecu BCM and ing into my series 2 and all be hunky dory or is it going to be a pain, one final question is tailshaft is the ute auto tail shaft the same length as manual? cheers |
||
|
|
|
23-12-2021, 05:18 AM
|
#2 | ||
|
PS13 K'S
Join Date: Aug 2007
Posts: 257
|
conversion done, Tried it with the ECU,BCM, and colum out of the 1.5, no go, used the 1.5 engine ecu, series 2 bcm and collum with a pats relearn and all is sweet. utes up and running again. and the manual tailshaft was shorter
|
||
|
|
|
AU series 1.5 Smartsheild update drive line into Series 2 ute
Linear Mode
