Casper Graphs...who said a VCT has no power?

Casper · 01-01-2005, 09:29 PM

Well, after all the stuff that has happened to my car over the last 18 months I thought it would be interesting to take the dyno graphs I had and compare them on one page to see the changes.
I plotted them all out and, with excel, added them to a graph. Actually very interesting. One thing that amused me is that now the latest power curve STARTS almost 10rwkw MORE than the original peak power with the dead MAP. Anyhow, I thought it was interesting.

sbutler · 01-01-2005, 09:35 PM

Shite thats some BIG inceases there ghost.......

Casper · 01-01-2005, 09:41 PM

Well, the blue line is with a dead Map and running a 10-1 A/F ratio, massive rich.
Purple is with the Unichip for the challenge and is closer to the stock figures. The next too are a huge jump with the exhaust and intake then the chip on top. All up, nothing in the head or engine has been changed, simply bolt on stuff.

loxxr6 · 01-01-2005, 10:31 PM

Its definately a nice increase over stock.

Off topic : In another week and a bit I hope to be dev 5 cammed. I can't wait.

Mr Cube · 03-01-2005, 03:40 PM

what did you do to the exhaust??

my chart is very similar to the purple one..

Casper · 03-01-2005, 03:44 PM

Quote:

Originally Posted by Mr Cube

what did you do to the exhaust??

my chart is very similar to the purple one..

JMM race headers and 2.5" redback cat back.

Mr Cube · 03-01-2005, 04:01 PM

Im getting very keen...

very keeeeen,

Casper · 03-01-2005, 04:05 PM

It feels like a different car. Goes a lot quicker now.

Casper · 03-01-2005, 04:27 PM

04-01-2005, 08:50 AM

Show off.

;)

Mr Cube · 04-01-2005, 10:51 AM

Quote:

Originally Posted by hambo_12

Show off. ;)

Second that...

Nah thats a great effort Casper...

Quote:

Originally Posted by casper

It feels like a different car. Goes a lot quicker now.

I bet it does...

Casper · 04-01-2005, 11:10 AM

Quote:

Originally Posted by hambo_12

Show off.

;)

lol, some one has to do it.... just wait till winter, I plan to remove that annoying 0.024.

The Mighty Red · 06-01-2005, 09:52 PM

Quote:

Originally Posted by Casper

lol, some one has to do it.... just wait till winter, I plan to remove that annoying 0.024.

Amaziiiing figures really, to get a 42% increase in power with these mods is excellent. And just shows you dont have to spend huge $$$ to get a I6 movin.
good work! How much is the chip fitted and tuned?

Casper · 06-01-2005, 10:07 PM

Quote:

Originally Posted by our_blue_xr6

Amaziiiing figures really, to get a 42% increase in power with these mods is excellent. And just shows you dont have to spend huge $$$ to get a I6 movin.
good work! How much is the chip fitted and tuned?

The Chip is $595 plus about $50 for fitting at a local distributer. I havent even had it custom tuned yet, its just a tune Lachlan did from the info I provided, still a little more in it when its custom tuned (another $200 or so). Well worth every cent too.

The VCT has an agressive cam as stock so that helps a bit too. Overall I cant complain, I think its a pretty good result for an auto.

The Mighty Red · 07-01-2005, 12:29 AM

Quote:

Originally Posted by Casper

The Chip is $595 plus about $50 for fitting at a local distributer. I havent even had it custom tuned yet, its just a tune Lachlan did from the info I provided, still a little more in it when its custom tuned (another $200 or so). Well worth every cent too.

The VCT has an agressive cam as stock so that helps a bit too. Overall I cant complain, I think its a pretty good result for an auto.

Any idea what sort of ET and rwkw you will get once the dev5 cam is installed?

The Mighty Red · 07-01-2005, 12:31 AM

I know you'll be sayin goodbye to 15 secs

Casper · 07-01-2005, 08:33 AM

Quote:

Originally Posted by our_blue_xr6

Any idea what sort of ET and rwkw you will get once the dev5 cam is installed?

I wont be getting a Dev 5 VCT cam, I'll be staying with the stock cam.
Still, the place for the car is a 14.5 second 1/4 pass by the time I'm finished, should get pretty close I think.

The Mighty Red · 07-01-2005, 12:05 PM

Quote:

Originally Posted by Casper

I wont be getting a Dev 5 VCT cam, I'll be staying with the stock cam.
Still, the place for the car is a 14.5 second 1/4 pass by the time I'm finished, should get pretty close I think.

oops sorry my bad,read the wrong thread ,loxxr6 gettin dev5 cam,

I was quoted $1400 fitted for a chip here on the sunshine coast, think i'll have to do some homework

Casper · 07-01-2005, 12:07 PM

Quote:

Originally Posted by our_blue_xr6

oops sorry my bad,read the wrong thread ,loxxr6 gettin dev5 cam,

I was quoted $1400 fitted for a chip here on the sunshine coast, think i'll have to do some homework

BA cant use the same chip I used, it will need an XEDE, Unichip or the new edit when its ready for the 6.

The Mighty Red · 07-01-2005, 12:21 PM

Quote:

Originally Posted by Casper

BA cant use the same chip I used, it will need an XEDE, Unichip or the new edit when its ready for the 6.

good job mines an AU XR6 HP then

Casper · 07-01-2005, 12:25 PM

Quote:

Originally Posted by our_blue_xr6

good job mines an AU XR6 HP then

LOL, my bad.

Try here:
http://www.chiptorque.com.au/

The Mighty Red · 07-01-2005, 12:40 PM

Quote:

Originally Posted by Casper

LOL, my bad.

Try here:
http://www.chiptorque.com.au/

thanks casper, interesting read, i should be able to do alot better than 1400, think i'll give them a ring.

Casper · 07-01-2005, 12:45 PM

Quote:

Originally Posted by our_blue_xr6

thanks casper, interesting read, i should be able to do alot better than 1400, think i'll give them a ring.

You may want to read the "chip challenge" we did on aufalcon.com as well. It might clear up some things for you as to what they can and cant do.

The Mighty Red · 07-01-2005, 12:51 PM

Quote:

Originally Posted by Casper

You may want to read the "chip challenge" we did on aufalcon.com as well. It might clear up some things for you as to what they can and cant do.

Already read it. Top read it is aswell, Think the chiptorque is more suited for what i need, both are obviously very good chips

Casper · 07-01-2005, 12:54 PM

Quote:

Originally Posted by our_blue_xr6

Already read it. Top read it is aswell, Think the chiptorque is more suited for what i need, both are obviously very good chips

Both are excellent, but I agree, for what I needed, the CT was the one for me too.
Now, on to bigger, better (and more expensive

: ) mods.

Auto VCT doing a NA 14.5 quarter? Anyone want to place a bet that this is impossible?

loxxr6 · 07-01-2005, 03:08 PM

Now, on to bigger, better (and more expensive ) mods.

Its horrible when it gets to that stage isn't it...when your dollar gets you less bang for buck.

Casper · 07-01-2005, 03:41 PM

Quote:

Originally Posted by loxxr6

Now, on to bigger, better (and more expensive ) mods.

Its horrible when it gets to that stage isn't it...when your dollar gets you less bang for buck.

The laws of deminishing returns I'm afraid. Of course, "expensive" is a subjective term too. I'm sure what I classify as expensive others see as cheap and vice versa.
Still, maybe a little over a $1000 and I should be nudging that 14.5 second 1/4 I think.

Its not how much you spend, its how smartly you spend it...and how well the whole package comes together. :monkes:

JC · 08-01-2005, 01:17 AM

Casper - if you can get down to 14.5 in a VCT 6 without pulling the motor apart, i for one will be bloody amazed.

now, how much is the chiptorque chip for the V8's. If it's around the same money and gets a similar result, I think I'm up for one of them. Do they do lay-buys?

Casper · 08-01-2005, 08:03 AM

Quote:

Originally Posted by JCXR8

Casper - if you can get down to 14.5 in a VCT 6 without pulling the motor apart, i for one will be bloody amazed.

now, how much is the chiptorque chip for the V8's. If it's around the same money and gets a similar result, I think I'm up for one of them. Do they do lay-buys?

Hehehehehe, prepare to be amazed by the end of the year JC. I'll get damn close to it I suspect.
As for the Chiptorque, well, it can do whatever the unichip can do and there some. Total cost is around $595 (chip) + $50 (fitting) + $200 (custome tuning) so your looking at $845 or there abouts. Certainly less than $1000 for the whole shebang, but no laybuy.

:

JC · 08-01-2005, 04:22 PM

Thanks Casper - I found your link to their site earlier in the thread and clicked on it. I couldn't buy the chip (even though I added it to my shopping cart), so I e-mailed them with my mods, and am waiting for them to get back to me.

I'm very interested in doing this though, as the V8s tend to run pretty rich in standard tune as well, so leaning the mixture out a fraction should provide a bit more oompf.