Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Ford Car Clubs > Ford Coupe Club of Australia > Coupe Restoration & Build

Reply
 
Thread Tools Display Modes
Old 18-04-2012, 11:21 PM   #271
marc97au
Starter Motor
 
Join Date: Apr 2012
Posts: 8
Default Re: XC Cobra #140

Great job Paul, and great pictures please keep up the great work I'll follow it with interest. How I found you was I was looking for info of what the colour was on the original Thompson (can type with only a dipstick no filler) power steering pump my Cobra came from the factory with. I want to recon the pump (a bit poor at 88K genuine k's but still lots of years) but want to touch it up before reinstalling. It's a bluey, green industrial metalic or hammer finish any ideas you found in your research or help would be appreciated. Thanks
marc97au is offline   Reply With Quote Multi-Quote with this Post
Old 29-04-2012, 10:29 PM   #272
Paull
P6 LTD
 
Paull's Avatar
 
Join Date: Feb 2005
Location: Perth
Posts: 3,288
Technical Contributor: For members who share their technical expertise. - Issue reason: For all the hard work performed around paint, trim, engine codes in the Classics section. General all round knwoledge and willingness to impart on others 
Default Re: XC Cobra #140

Quote:
Originally Posted by Brute 33
Hi,any updates Paul ?
Not a great deal to report I'm afraid. I got a few hours in today.

Drive shaft is in


Power steering pump is also in


Priming the system


I got a bit lucky here (touch wood) in that I was a bit concerned in having the new power steering box in and no oil to it for quite some time. However, after putting the pump in and turning it over (with no luck), out came the vacuum pump to 'pull' the oil through as compared to pushing it through with the pump. Once that was done, I ran it up for a little while and all appears to be okay (no leaks from the PS box). Hope that remains the same when the engine is started.

I have also added some trans oil to the FMX as well as primed the engine lube oil. I stripped an old distributor and now use that is my oil drive with the aforementioned cordless drill. Rocker cover also came off so as to ensure a full supply of oil was coming up through to the rocker gear.

Paull is offline   Reply With Quote Multi-Quote with this Post
Old 29-04-2012, 10:46 PM   #273
gcg2503
FF.Com.Au Hardcore
 
Join Date: Mar 2008
Location: Melbourne
Posts: 10,846
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always adding valued comments,  never involved in any disputes. A credit to this forum. 
Default Re: XC Cobra #140

Very nice Paul.

I am looking at your factory power steering pump with great envy. No leaks and no noise!
gcg2503 is offline   Reply With Quote Multi-Quote with this Post
Old 01-08-2012, 08:17 PM   #274
coupeaddict
Regular Member
 
Join Date: Jul 2012
Posts: 173
Default Re: XC Cobra #140

Mate,
Brilliant is the only way to describe, i have started similar project,at painting stage, paint code 9 sno white, engine bay and inners done, looks bit creamy..does that sound right to you..
coupeaddict is offline   Reply With Quote Multi-Quote with this Post
Old 12-08-2012, 08:58 PM   #275
Paull
P6 LTD
 
Paull's Avatar
 
Join Date: Feb 2005
Location: Perth
Posts: 3,288
Technical Contributor: For members who share their technical expertise. - Issue reason: For all the hard work performed around paint, trim, engine codes in the Classics section. General all round knwoledge and willingness to impart on others 
Default Re: XC Cobra #140

A few small updates.

I was not happy with the headlights that had been restored so after a number of months, I managed to get a couple of NOS ones.


And now fitted to the grille


The carby is now on properly and most connections have been done, a pic of underneath from the transmission


And a few bits that have been bought/reconditioned

Radiator



Radiator shrouds (one for the P6 LTD as well), before and after cleaning




Exhaust system, still need to chase up the collector pipes




We all love NOS






Note to self, always put choke tubes on before installing engine. This is turning out to be a crap job getting these on now




Lucky score here - long range tank NOS fuel sender


Air conditioning parts
New compressor


Drier/Receiver


Tx valve


I am currently working on buying all new hoses (plus fittings). The condensor is also being cleaned and pressure tested. Once done, it can go back in along with the radiator, shroud and grille.

I have also stripped a few AC compressors so as to get all of the drive pulleys zinced


I have asked the question here pertaining to "silver or gold" drive pulleys" I think it is a case of silver, not gold

I have tried cleaning up some washer bottles with mixed success
Before


After

They are clean inside but they are quite yellow on the outside. Will try a few tips from this thread
Cleaning washer bottles

Hopefully I can get rid of the yellow staining.

And a few pics of the engine as it stands now


Paull is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 17-08-2012, 03:37 PM   #276
lilmattie
FF.Com.Au Hardcore
 
lilmattie's Avatar
 
Join Date: Sep 2005
Location: Brisbane, Sunny QLD
Posts: 2,377
Default Re: XC Cobra #140

I thoroughly enjoy reading your progress Paull. Thanks for sharing.
__________________
Wanted Parts
  • Control knobs for XA/B dealer-fit full length under-dash aircon.
  • VGC XA/B dashpad in black
lilmattie is offline   Reply With Quote Multi-Quote with this Post
Old 31-08-2012, 10:02 PM   #277
Paull
P6 LTD
 
Paull's Avatar
 
Join Date: Feb 2005
Location: Perth
Posts: 3,288
Technical Contributor: For members who share their technical expertise. - Issue reason: For all the hard work performed around paint, trim, engine codes in the Classics section. General all round knwoledge and willingness to impart on others 
Default Re: XC Cobra #140

A very small update.

I have got the AC hoses back today



Now I can finish off the engine bay in its entirety.

What's interetsing to note is the price of things in the West. After seeing George's Landau thread, I asked how much he paid for his new hoses - $350 in total inclusive of new fittings. I then contacted a local supplier - $880 in total inclusive of new fittings

Fortunately I have a friend in the AC business and the hoses & fittings (only require three as I am going straight from the condenser to to the receiver) was $200. I just can't believe the absolute rip off prices that we are expected to be paying here!
Paull is offline   Reply With Quote Multi-Quote with this Post
Old 31-08-2012, 10:22 PM   #278
cs123
Donating Member
Donating Member3
 
cs123's Avatar
 
Join Date: Jan 2005
Location: Morayfield
Posts: 27,206
Community Builder: In recognition of those who have helped build the AFF community. - Issue reason: Can't think of anyone more deserving. Russ Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: For all the technical support behind the scenes. Tech Writer: Recognition for the technical writers of AFF - Issue reason: Technical submission 
Default Re: XC Cobra #140

Did you buy a new TX valve for it and what gas do you plan to run?
__________________
I love Holdens....
cs123 is online now   Reply With Quote Multi-Quote with this Post
Old 01-09-2012, 12:11 AM   #279
Paull
P6 LTD
 
Paull's Avatar
 
Join Date: Feb 2005
Location: Perth
Posts: 3,288
Technical Contributor: For members who share their technical expertise. - Issue reason: For all the hard work performed around paint, trim, engine codes in the Classics section. General all round knwoledge and willingness to impart on others 
Default Re: XC Cobra #140

Quote:
Originally Posted by cs123
Did you buy a new TX valve for it and what gas do you plan to run?
Yep. I am going to run HyChill in it.
Paull is offline   Reply With Quote Multi-Quote with this Post
Old 01-09-2012, 08:21 AM   #280
cs123
Donating Member
Donating Member3
 
cs123's Avatar
 
Join Date: Jan 2005
Location: Morayfield
Posts: 27,206
Community Builder: In recognition of those who have helped build the AFF community. - Issue reason: Can't think of anyone more deserving. Russ Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: For all the technical support behind the scenes. Tech Writer: Recognition for the technical writers of AFF - Issue reason: Technical submission 
Default Re: XC Cobra #140

That's what I am planning too. Where abouts did you buy the TX valve and rotolock connections from? Are the TX valves still available for the lower pressure gas?

Love your work BTW, great job
__________________
I love Holdens....
cs123 is online now   Reply With Quote Multi-Quote with this Post
Old 01-09-2012, 12:42 PM   #281
Cabbage
FF.Com.Au Hardcore
 
Cabbage's Avatar
 
Join Date: Apr 2008
Posts: 1,264
Default Re: XC Cobra #140

Awesome Paull, my favourite build. Its only subtle but if you don't get the right lights for the twin headlight grill front, it just doesn't look the right.
Cabbage is offline   Reply With Quote Multi-Quote with this Post
Old 01-09-2012, 01:31 PM   #282
SCJCoupe
Regular Member
 
SCJCoupe's Avatar
 
Join Date: Aug 2011
Location: Perth WA
Posts: 216
Default Re: XC Cobra #140

Quote:
Originally Posted by Paull
What's interetsing to note is the price of things in the West. After seeing George's Landau thread, I asked how much he paid for his new hoses - $350 in total inclusive of new fittings. I then contacted a local supplier - $880 in total inclusive of new fittings
Fortunately I have a friend in the AC business and the hoses & fittings (only require three as I am going straight from the condenser to to the receiver) was $200. I just can't believe the absolute rip off prices that we are expected to be paying here!

Yes, seems we get ripped off a bit in WA. Every business seems to think they can add a huge margin cos we live in a mining state and we are "booming".
It must be this mentality that causes a difference of $530 in your case, as the freight component from the east wouldn't even be close to $530.
Then they wonder why we look elsewhere like overseas or eastern states to buy products!
SCJCoupe is offline   Reply With Quote Multi-Quote with this Post
Old 01-09-2012, 06:37 PM   #283
gcg2503
FF.Com.Au Hardcore
 
Join Date: Mar 2008
Location: Melbourne
Posts: 10,846
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always adding valued comments,  never involved in any disputes. A credit to this forum. 
Default Re: XC Cobra #140

AC hoses is a funny one

I paid $350ish in total but had two more hoses

The long power steering one that runs under the car cost me $120 alone

$800 is just plain wrong
gcg2503 is offline   Reply With Quote Multi-Quote with this Post
Old 01-09-2012, 07:42 PM   #284
Scooter
FF.Com.Au Hardcore
 
Scooter's Avatar
 
Join Date: Jan 2009
Location: Perth
Posts: 1,633
Default Re: XC Cobra #140

Quote:
Originally Posted by Cabbage
Awesome Paull, my favourite build. Its only subtle but if you don't get the right lights for the twin headlight grill front, it just doesn't look the right.
Just wondering, are you implying he has the incorrect headlights for originality, or did he previously have the incorrect headlights?
Looks like it is coming along (slowly) nicely mate. Can't wait to see it on the streets of Perth! Mine is actually in getting panelled right now too.
Scooter is offline   Reply With Quote Multi-Quote with this Post
Old 06-09-2012, 08:29 PM   #285
Paull
P6 LTD
 
Paull's Avatar
 
Join Date: Feb 2005
Location: Perth
Posts: 3,288
Technical Contributor: For members who share their technical expertise. - Issue reason: For all the hard work performed around paint, trim, engine codes in the Classics section. General all round knwoledge and willingness to impart on others 
Default Re: XC Cobra #140

Quote:
Originally Posted by cs123
That's what I am planning too. Where abouts did you buy the TX valve and rotolock connections from? Are the TX valves still available for the lower pressure gas?

Love your work BTW, great job
TheTx valve was bought via Autoone. I just supplied all the part numbers and they got the gear in for me. With respect to the rotolock connections, I am waiting for the hose fitter to supply all part numbers and I will then get these as before. They are shown in the Jayair catalogue but there are many different types and I want to ensure that I don't get the wrong ones.
Paull is offline   Reply With Quote Multi-Quote with this Post
Old 06-09-2012, 08:31 PM   #286
Paull
P6 LTD
 
Paull's Avatar
 
Join Date: Feb 2005
Location: Perth
Posts: 3,288
Technical Contributor: For members who share their technical expertise. - Issue reason: For all the hard work performed around paint, trim, engine codes in the Classics section. General all round knwoledge and willingness to impart on others 
Default Re: XC Cobra #140

Quote:
Originally Posted by SCJCoupe
Yes, seems we get ripped off a bit in WA. Every business seems to think they can add a huge margin cos we live in a mining state and we are "booming".
It must be this mentality that causes a difference of $530 in your case, as the freight component from the east wouldn't even be close to $530.
Then they wonder why we look elsewhere like overseas or eastern states to buy products!
Anthat's why I buy so much gear off the internet and not only from Aus. However, in saying that, my local Auotone store is still very competitive so I always gove them first option to beat my beat price. Also, Superoo Falcon Spares have always given me good prices too.
Paull is offline   Reply With Quote Multi-Quote with this Post
Old 06-09-2012, 08:32 PM   #287
Paull
P6 LTD
 
Paull's Avatar
 
Join Date: Feb 2005
Location: Perth
Posts: 3,288
Technical Contributor: For members who share their technical expertise. - Issue reason: For all the hard work performed around paint, trim, engine codes in the Classics section. General all round knwoledge and willingness to impart on others 
Default Re: XC Cobra #140

Quote:
Originally Posted by Scooter
Mine is actually in getting panelled right now too.
Where are the pics?????????????????????????
Paull is offline   Reply With Quote Multi-Quote with this Post
Old 07-09-2012, 11:39 AM   #288
Scooter
FF.Com.Au Hardcore
 
Scooter's Avatar
 
Join Date: Jan 2009
Location: Perth
Posts: 1,633
Default Re: XC Cobra #140

Quote:
Originally Posted by Paull
Where are the pics?????????????????????????
Not much to see atm really. Just a bare coupe shell with rear parcel shelf and right rear quarter removed and new (not NOS just better) bits tacked in place, plus a few minor rust repairs. Should be going to Garrys today to check on progress, might get some pics. And I agree, Superoo is about the only decent place in town, otherwise internet/Ebay only way to go!
Scooter is offline   Reply With Quote Multi-Quote with this Post
Old 07-09-2012, 01:21 PM   #289
SCJCoupe
Regular Member
 
SCJCoupe's Avatar
 
Join Date: Aug 2011
Location: Perth WA
Posts: 216
Default Re: XC Cobra #140

Quote:
Originally Posted by Paull
Anthat's why I buy so much gear off the internet and not only from Aus. However, in saying that, my local Auotone store is still very competitive so I always gove them first option to beat my beat price. Also, Superoo Falcon Spares have always given me good prices too.
True, Superoo's is very competitive on items where he can. He's always looked after me.
I'm the same with Autopro Morley. Always give him the option to beat a price and 70% of time can. It's just on performance parts or specialist parts that he can't come close sometimes.
SCJCoupe is offline   Reply With Quote Multi-Quote with this Post
Old 11-09-2012, 12:47 PM   #290
Aranciafalcon
Authorised Tank Commander
 
Aranciafalcon's Avatar
 
Join Date: Feb 2009
Location: Perth Wa
Posts: 136
Default Re: XC Cobra #140

Looking good Paul, I will have to come out soon and check up on it...
__________________
***1978 XC Falcon 500 Rallypack sedan***
***351, FMX, 9inch***
Aranciafalcon is offline   Reply With Quote Multi-Quote with this Post
Old 11-09-2012, 04:11 PM   #291
Cabbage
FF.Com.Au Hardcore
 
Cabbage's Avatar
 
Join Date: Apr 2008
Posts: 1,264
Default Re: XC Cobra #140

Quote:
Originally Posted by Scooter
Just wondering, are you implying he has the incorrect headlights for originality, or did he previously have the incorrect headlights?
Looks like it is coming along (slowly) nicely mate. Can't wait to see it on the streets of Perth! Mine is actually in getting panelled right now too.
Scooter, not implying anything regarding PAull's build, just a comment on xc headlights generally. I think the original lights were curved and have a slightly meaner look than then newer style headlights that have a flatter glass. The difference is subtle with IMO the original curved headlights lookin the best.
Cabbage is offline   Reply With Quote Multi-Quote with this Post
Old 06-10-2012, 09:51 AM   #292
kendallRTV
Regular Member
 
kendallRTV's Avatar
 
Join Date: Sep 2009
Location: Perth
Posts: 104
Default Re: XC Cobra #140

The old coupe is looking good Paul, very nice rebuild.

To clean up the water bottles try this trick I use to clean up old yellowed Lego parts.

http://www.brothers-brick.com/2009/0...look-new-news/

I don't know what type of plastic the bottle is made of but its worth a go, some parts I have done have taken up to 2 weeks under a light to get clean but the results are amazing.
__________________
XC Fan Boy

IWCMOGTVM Club Supporter (I Will Change My Own Gears Thankyou Very Much)

Improvise, Adapt, Overcome
kendallRTV is offline   Reply With Quote Multi-Quote with this Post
Old 14-10-2012, 01:18 PM   #293
Paull
P6 LTD
 
Paull's Avatar
 
Join Date: Feb 2005
Location: Perth
Posts: 3,288
Technical Contributor: For members who share their technical expertise. - Issue reason: For all the hard work performed around paint, trim, engine codes in the Classics section. General all round knwoledge and willingness to impart on others 
Default Re: XC Cobra #140

I took a week off recently and have made some good progress on the car. to start with, as mentioned before, I had bought some NOS head light assemblies off eBay. One of the came with a lamp but the other did not. The issue here was that of the being an old style relfector, the usual H4-7's do not fit. The original lamp fortunately came with part numbers so after a quick google search, I found this page

http://www.donsbulbs.com/cgi-bin/r/b...Cp36t~ece.html

At $57 each, I thought, perhaps not! I then further searched eBay and all other sites, to no avail. I then contacted my local car shop and they said that these had not been available for a long time. From the other web page, I had managed to get further information concerning these globes so it was then a case of back to goolge and I found this

http://www.cp-lighting.co.uk/H4-12V-60-55W-P36T-463

As can be seen, at a price of £4.62 compared to $57, the choice was pretty obvious. Only problem was postage - $85 Me being me, left it to the last minute and had buy them at any rate. So, I bought 5; 1 for the missing head light and 4 spares. About 1 week later, they turned up and this was the first job for the week off.





Next was completing the AC compressor.I had also recently got the zinced parts back and the clutch turned out well but the flywheel was not as good as expected. When I spoke with them at pick up time, they had said that they blast the flywheels first. I think that this is part of the problem. The face of the metal is not as you would normally see with blasting but I think next time, I would get the flywheels plastic media blasted first.







At any rate, as it had to be assembled and I had bought the bearings, it was then re-assembled.











Giving it a quick test and was working well



And all completed
Paull is offline   Reply With Quote Multi-Quote with this Post
Old 14-10-2012, 01:40 PM   #294
Paull
P6 LTD
 
Paull's Avatar
 
Join Date: Feb 2005
Location: Perth
Posts: 3,288
Technical Contributor: For members who share their technical expertise. - Issue reason: For all the hard work performed around paint, trim, engine codes in the Classics section. General all round knwoledge and willingness to impart on others 
Default Re: XC Cobra #140

The next job was to finish off all of the items remaining in the engine bay. That is, radiator and shroud, AC condensor, washer bottle, engine bay wiring and testing, AC receiver and test fit of hoses to compressor & Tx valve, timing of the engine and then followed up with the distributor & leads and then checking that all bolts, belts etc were tightened to the required torque.

Don't mind the oversized battery (and dodgey wiring), this is just there to test all electrics (power windows and interior as well), plus also run up the engine when ready.











With that done, I then put the exhaust on. I am not even going to show photos of this as it is a complete mess - nothing is correctly lined up but it can be fixed. I had bought the resonator/muffler sections from one supplier and the 2 manifold pipes from another (Oldschool Mufflers). The problem here was that I could not get the front 2 pipes from the original supplier. I am thinking that most if not all people put extractors on Clevelands, not the factory exhaust manifolds. In hindsight, what I should have done was to have bought this directly from Oldschool Mufflers

http://www.ebay.com.au/itm/FORD-FALC...item27c668c610

Live and learn. I was just keen to keep the standard setup namely the resonators. Once I get the car going, it will have to get the exhaust system completely re-done.
Paull is offline   Reply With Quote Multi-Quote with this Post
Old 14-10-2012, 01:52 PM   #295
Paull
P6 LTD
 
Paull's Avatar
 
Join Date: Feb 2005
Location: Perth
Posts: 3,288
Technical Contributor: For members who share their technical expertise. - Issue reason: For all the hard work performed around paint, trim, engine codes in the Classics section. General all round knwoledge and willingness to impart on others 
Default Re: XC Cobra #140

The final job for my time off was that of the interior. As usual, nothing was easy and what was expected to take 1 day, took 2 1/2 days. It's never fun trying to line up bolt/screw holes with new carpet, but I finally got there. There was also the issue of fitting the screws in for the console (front). I think that this job is best done with the complete dash out of the car. This is where the flexible drive drill chucks, plus a very helpful wife, come in very handy. The trimmer had also put all of the seat bases on the wrong way so they had to be changed over. As imagined, the B pillar pinch weld and trims were a complete pr!ck of a job. At least the kick panels and scuff plates weren't too bad.

I have also put the door cards on now, just for trial fitting as they will have to come off again when the car goes back to to the spray painter for finishing works. Same applies to the front and rear arm rests.

And now for some pics














There are still quite a number of items yet to be done but work is progressing so I am hoping to be able to get the car to the spray painter by the end og the year - here's hoping.
Paull is offline   Reply With Quote Multi-Quote with this Post
Old 14-10-2012, 02:32 PM   #296
zoesgift
FF.Com.Au Hardcore
 
Join Date: May 2010
Posts: 1,848
Default Re: XC Cobra #140

hi paull i just tried to pm you but you must have too many messages! i may have something you need. regards
zoesgift is offline   Reply With Quote Multi-Quote with this Post
Old 14-10-2012, 07:44 PM   #297
Paull
P6 LTD
 
Paull's Avatar
 
Join Date: Feb 2005
Location: Perth
Posts: 3,288
Technical Contributor: For members who share their technical expertise. - Issue reason: For all the hard work performed around paint, trim, engine codes in the Classics section. General all round knwoledge and willingness to impart on others 
Default Re: XC Cobra #140

Quote:
Originally Posted by Aranciafalcon
Looking good Paul, I will have to come out soon and check up on it...
Hi Rob, now that the weather is getting better FINALLY!!, please do so.
Paull is offline   Reply With Quote Multi-Quote with this Post
Old 14-10-2012, 07:47 PM   #298
Paull
P6 LTD
 
Paull's Avatar
 
Join Date: Feb 2005
Location: Perth
Posts: 3,288
Technical Contributor: For members who share their technical expertise. - Issue reason: For all the hard work performed around paint, trim, engine codes in the Classics section. General all round knwoledge and willingness to impart on others 
Default Re: XC Cobra #140

Quote:
Originally Posted by Cabbage
Scooter, not implying anything regarding PAull's build, just a comment on xc headlights generally. I think the original lights were curved and have a slightly meaner look than then newer style headlights that have a flatter glass. The difference is subtle with IMO the original curved headlights lookin the best.
The lights were fitted in the first place were reconditioned units, that is, original glass but with new (repro) reflectors. I did not have an issue with quality of work done, it was more of a case that the drivers side was not fitting into the retaining bucket. And, if you have the chance to fit NOS, why wouldn't you?
Paull is offline   Reply With Quote Multi-Quote with this Post
Old 14-10-2012, 07:50 PM   #299
Paull
P6 LTD
 
Paull's Avatar
 
Join Date: Feb 2005
Location: Perth
Posts: 3,288
Technical Contributor: For members who share their technical expertise. - Issue reason: For all the hard work performed around paint, trim, engine codes in the Classics section. General all round knwoledge and willingness to impart on others 
Default Re: XC Cobra #140

Quote:
Originally Posted by zoesgift
hi paull i just tried to pm you but you must have too many messages! i may have something you need. regards
Apologies, have now made some space.
Paull is offline   Reply With Quote Multi-Quote with this Post
Old 14-10-2012, 08:31 PM   #300
XB GS 351 Coupe
FF.Com.Au Hardcore
 
Join Date: Oct 2010
Location: Mid North Coast
Posts: 6,421
Default Re: XC Cobra #140

Awesome build and car.

If it overheats once up and running consider getting the correct length fan spacer to put the engine fan in the right spot, it's way to deep in the shroud, only about 1/3rd of the fan should be inside the shroud and 2/3rd outside for maximum air movement through the radiator.

Your fan will tend to cavitate air and restrict air slow through the radiator
__________________
The Daily Driver : '98 EL Falcon, 5 Speed , 3.45 lsd

The Week End Bruiser : FPV BF GT 40th Anniversary, 6 Speed Manual, 6/4 Brembo and lots of Herrod goodies

Project 1 : '75 XB GS 351 Ute, Toploader, 9" with 3.5's

Project 2 : '74 XB GS Big Block Coupe, Toploader, 9" with 4.11's

In Storage : '74 XB GS 351 Fairmont Sedan



XB Falcon Owners Group



Mike's Man Cave


XB GS 351 Coupe is offline   Reply With Quote Multi-Quote with this Post
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 06:53 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL