|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
02-12-2019, 04:28 PM
|
#1 | ||
|
Regular Member
Join Date: Jul 2019
Posts: 74
|
Hi guys,
Mu wiper washer is not activating when pulling back on the wiper stalk. I have removed and cleaned the filter and tested the wiper motor itself plus a spare I have and they are fine. Wipers work and from what I can see the wiper and washer pump share the same fuse. I would say it is not making contact in the stalk, can anyone advise if this can be easily fixed or is it a new stalk? Before I start pulling it apart. Cheers Craig |
||
|
|
|
03-12-2019, 10:06 AM
|
#2 | ||
|
Chairman & Administrator
  
Join Date: Dec 2004
Location: 1975
Posts: 106,578
|
The B-Series stalks are known for failing so it is possible your AU one has failed or one of the internal wires is broken in the column. Do the wipers work when you rotate the stalk?
__________________
 Observatio Facta Rotae
|
||
|
|
|
|
03-12-2019, 12:29 PM
|
#3 | |||
|
Regular Member
Join Date: Jul 2019
Posts: 74
|
Yeah the wiper work fine when depressing the stalk, just not the pump, will have to pull the stalk apart and see if I can see anything. I have manually checked the pump and it does work.
Quote:
|
|||
|
|
|
Wiper washer not activating
Linear Mode
