|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
14-04-2023, 02:47 PM
|
#1 | ||
|
Regular Member
Join Date: Jul 2015
Location: Northgate QLD
Posts: 33
|
Hi All,
I have a 1968 Mk2 Cortina with the single line master cylinder. I have seen what looks very similar to mine advertised for the Mk1 Cortina. The one I am looking at is P4979. The data shows the correct 15.87 bore but I am not sure about the port size, or the mount offset. Does anyone know if the brake master cylinder used on the Cortina Mk1 is the same as the Mk2 single line brake master cylinder?? Has anyone used a P4979 MC? For interest my master cylinder has: * A bore of 15.87 mm (5/8 Inch) * The port is 3/8 24 UNF * the mount is 2.25 inch (57.2mm) centre * The body length from the mount is 115mm Thanks in advance Ray |
||
|
|
|
14-04-2023, 05:39 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Nov 2009
Posts: 2,720
|
port size is probably common and will be imperial. Talk to Mike at Yesterford. they are in Vic but I'm sure he will help
|
||
|
|
|
|
15-04-2023, 01:38 PM
|
#3 | ||
|
Regular Member
Join Date: Apr 2014
Posts: 62
|
Ring AL_KO at yatala they sell the master cylinders tell
them the size and they can match it it will be a .75 by memory |
||
|
|
|
Cortina Mk2 brake master cylinder
Re: Cortina Mk2 brake master cylinder
Linear Mode
