|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
15-11-2011, 09:07 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: Jan 2007
Location: Port Lincoln, SA
Posts: 5,109
|
g'day guys,
I have found a cheap early model fairlane stereo. Will it fit in my late model series II XR fascia? If not, which ones are interchangable?
__________________
cheers Shaun Current SY FPV F6X Territory #214 Previous FG MkII G6E Turbo built by Heinrichs Performance and Tuning BFII FPV TORNADO #0021 351rwkw - Heinrich Performance and Tuning "Milk is for babies. When you grow up you have to drink beer" - Arnold Schwarzenegger |
||
|
|
|
15-11-2011, 09:36 PM
|
#2 | ||
|
not here much anymore
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
|
The shape of the units doesnt change from series to series IIRC, some are single DIN as opposed to AUII onwards when they all went double DIN though.
I think you may strike compatibility issues if putting an S1 unit into anything else but someone may be able to confirm that. Why are you bothering anyway? Decent headunit is under $200 now, youd be mad to even bother with the stock one.
__________________
RAM 1500
|
||
|
|
|
|
15-11-2011, 09:57 PM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Jan 2007
Location: Port Lincoln, SA
Posts: 5,109
|
i just wanna use the face of it to cut up to make a surround for my double din dvd player, so it sits flush and fill in the gaps around it
__________________
cheers Shaun Current SY FPV F6X Territory #214 Previous FG MkII G6E Turbo built by Heinrichs Performance and Tuning BFII FPV TORNADO #0021 351rwkw - Heinrich Performance and Tuning "Milk is for babies. When you grow up you have to drink beer" - Arnold Schwarzenegger |
||
|
|
|
|
16-11-2011, 10:42 PM
|
#4 | ||
|
Donating Member
 Join Date: Aug 2006
Posts: 5,026
|
Au1 has different curve angle to au2. Side measurements are the same. Connector loom is wired different so wont function correctly.
|
||
|
|
|
|
17-11-2011, 10:46 AM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: Jan 2007
Location: Port Lincoln, SA
Posts: 5,109
|
as i said, i just wanna make a shroud for the double din unit i have in there, so it doesnt need to be connected, ill just be using the face of the stock stereo.
__________________
cheers Shaun Current SY FPV F6X Territory #214 Previous FG MkII G6E Turbo built by Heinrichs Performance and Tuning BFII FPV TORNADO #0021 351rwkw - Heinrich Performance and Tuning "Milk is for babies. When you grow up you have to drink beer" - Arnold Schwarzenegger |
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
stock series I stereo into late model series II
Linear Mode
