Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Escort, Cortina, Sierra and Capri

Reply
 
Thread Tools Display Modes
Old 23-06-2005, 08:37 PM   #61
DavO
Starter Motor
 
DavO's Avatar
 
Join Date: Jan 2005
Location: Brissie
Posts: 18
Default

what are you looking at doing to the rear suspension?
coil overs? or something else (if u're doing coil overs i'd be xtreamly interested in how much they cost and how much effort they are to do )
DavO is offline   Reply With Quote Multi-Quote with this Post
Old 25-06-2005, 10:15 PM   #62
Timmeh
Fairmont Ghia
 
Timmeh's Avatar
 
Join Date: Dec 2004
Location: NSW
Posts: 2,144
Default

Well I have heard I have to keep the same suspension mounting points and cannot get a coilover kit engineered to be street legal, but other people have told me otherwise, so I'll be contacting a couple of engineers and finding out.

At this stage, the plan is to go for a single or dual leaf spring rear end, if I can, i'll move them inboard to allow wider tubs, if not, keep the suspension where it is, install mini-tubs, and add flares to the body.

I can only increase the overall track of the vehicle by 25mm according to the RTA so moving the suspension inboard will be a huge bonus.

Tim
Timmeh is offline   Reply With Quote Multi-Quote with this Post
Old 27-06-2005, 10:54 AM   #63
TWiZTiD EA
Guest
 
Posts: n/a
Default

i would go a 5 link rear end with a single 125 pound leaf spring works great
  Reply With Quote Multi-Quote with this Post
Old 12-07-2005, 05:52 PM   #64
Paul735
Starter Motor
 
Join Date: Jul 2005
Posts: 10
Default

Hello, Great to see you doing up an escort, i had a very hot 2ltr years ago and found with very high compression and an upjetted standard carb i was easily able to leave everything at the lights, ran out of breath at 190k but would do 100 in under 7sec.

I myself would like another escort pref a Mk1 but i am not so sure i want to get my hands dirty any more, be sure and get the crank dowled as the std bolts arent quite enough and do break.

Look up Puma race engines online they have some great info on the Pinto, i have heard of 200 rwhp N/A in some cases which is awesome power per litre, you would need to bore it to 2391cc..which is 93mm bore to achive very high outputs and for road use most likely not relevent unless you want an animal.

Of course you can go for a nissan engine like a sr20 which would give u 300 rwhp, but you would need a nissan gearbox and very strong diff, there is a Mk1 cortina with this set up that runs 11.5 and is a daily driver, of course expect to pay 15large to get this set up in an Escort.

I have looked at this forum for a while and this is my 1st post i hope to be able to post some info that may help in the future..
Paul735 is offline   Reply With Quote Multi-Quote with this Post
Old 18-02-2007, 08:06 PM   #65
j26
Starter Motor
 
Join Date: Feb 2007
Posts: 2
Default RS2000 Boxes

hello I just stumbled across this site and noticed your car, very nice i might add.Im interested in the gearbox you have is it a standard RS box coz i have one on a xflow race motor in new zeland and am interested in any specs on it. I recoognized it from the extended tail housing but have never seen one anywhere before and no one seems to know any thing about it but I know its strong . By the way I built a similar motor to yours in a mk 1 i had using a 1600 ohc head, fr32 cam, twin 45s on a 2litre bottom end with sierra 5 spd and 4.1 ratio diff. Awesome fun to drive Anyway good luck with the build and thanks for any info on the gearbox.
j26 is offline   Reply With Quote Multi-Quote with this Post
Old 18-02-2007, 08:49 PM   #66
Timmeh
Fairmont Ghia
 
Timmeh's Avatar
 
Join Date: Dec 2004
Location: NSW
Posts: 2,144
Default

Quote:
Originally Posted by j26
hello I just stumbled across this site and noticed your car, very nice i might add.Im interested in the gearbox you have is it a standard RS box coz i have one on a xflow race motor in new zeland and am interested in any specs on it. I recoognized it from the extended tail housing but have never seen one anywhere before and no one seems to know any thing about it but I know its strong . By the way I built a similar motor to yours in a mk 1 i had using a 1600 ohc head, fr32 cam, twin 45s on a 2litre bottom end with sierra 5 spd and 4.1 ratio diff. Awesome fun to drive Anyway good luck with the build and thanks for any info on the gearbox.
G'day mate.

My transmission is just the std manual 4 speed that is found on all Australian 1600 and 2L Escorts, although the RS has a quick shifter. They can be had very cheaply in wreckers or on ebay, and they are pretty tough! I have four for my rally car as well, there are still four because none have ever broken (yet anyway). Mostly it's the nylon thread on the shifters that can break.

That's about all the info I have on it, but if you want more info check out the classic ford forum (www.classicford.mine.nu) as the guys there know everything about the Escorts!

Tim
Timmeh is offline   Reply With Quote Multi-Quote with this Post
Old 18-02-2007, 10:52 PM   #67
j26
Starter Motor
 
Join Date: Feb 2007
Posts: 2
Default

thanks for that info tim, thats probably why ive never seen 1 before then if its an australian equipped unit and i noticed that the splines were suited to the ohc engines also which adds up.they can cope with a hammering though its a shame about the ratios in them. cheers jamie
j26 is offline   Reply With Quote Multi-Quote with this Post
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 12:31 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL