|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
11-03-2012, 05:25 PM
|
#1 | ||
|
Starter Motor
Join Date: Jan 2012
Posts: 1
|
Hi,
I've replaced my old AU1 grey steering wheel (along with almost everything else that was grey inside the car) with a black leather steering wheel from an XR6 -AU2 or AU3 I'm not sure. Now the horn doesn't work. 1. Everything worked on the old wheel. 2. Cruise control still works with the new wheel installed. 3. The clock spring looks damaged but I'm pretty sure I didn't do it removing the old wheel. (so should still work, right?) 4. I found this thread http://www.fordforums.com.au/showthr...doesn%27t+work and tried JC's "wire in the switch" technique but the horn didn't sound. How can I work out where the problem is? Horn pad, clock spring, switch, wiring (multimeter?)? The only diff I can see between the two wheels is that the old wheel had a 3 wires between the airbag to the wheel (airbag, horn, 3rd mystery wire?) which has been replaced by 2 wires (airbag, horn) plus a solid metal connection. Any help would be much appreciated. Thanks, Edward. |
||
|
|
Horn doesn't work
Linear Mode
