[bundybear75]

Originally Posted by Charlesj

I had an intermittent sensor code popping so wanted to clean the internal filter magnet off.. I did disconnect the transmission loom during the process so very possible it’s cleared a memory...

External filter was changed and oil level filled but the next step was running vehicle to top levels off which I can’t do because of this issue..

Anyone got a reset procedure / relearn for the gearbox? I’ll have a look for forscan and see if I can get hold of a unit.. not used scanners much so might need a guide..

Thanks for help in advance..

There is a fairly common issue with the speed sensor in the DCT transmission - unfortunately a fairly expensive fix. Mine occurred at about 135,000km.

Have you double checked the plug? You didn't damage any pins trying to plug it back in? This may be the issue??

Forscan is available as an app for you smartphone. I found it on the play store and it was around $7 from memory. I use a OBDLink MX via bluetooth but if you use an I-phone you would need the wireless version. I also successfully used a cheaper ebay OBD bluetooth dongle when I first had issues