Quote:
Originally Posted by NZ XR6
Thanks for the write-up. With regards clamping the brake hose, the fluid will follow the path of least resistance. I'd suggest opening the nipple a couple of turns and using tubing with a decent ID.
Sent from somewhere using Tapatalk
|
I think the same.
Finding it too hard to pull the handbrake cable through its mounting bracket I used a locking plier on the cable ferrule and levered it out with a screwdriver while squeezing the plastic retainer with long nose pliers. Since the ferrule is plastic there's a risk of cracking it so best to clamp only as much as needed and use a bit of cardboard or leather in the jaws ...