Re: Engine malfunction warning and P244C DTC
|
|
Quote:
Originally Posted by GTLEGEND
Mondeo Vehicles built after 4/2012 have 3 EGT sensors. What your describing and the DTC logged can be caused by a EGT3 sensor malfunction. EGT3 is the one at the rear end of the DPF between the heat shields. EGT2 is in the middle of the DPF, between heat shields and EGT 1 is on the non heat shielded part of the exhaust near the flange of the DPF towards the engine front side . EGT3 has a part number of CG9A-12B591-AC.
I would be checking the EGT3 sensor operation..
|
Thanks GTLegend, I have a Bluetooth dongle on the way and I will set some meters up to monitor whats happening when it arrives. I replaced the middle EGT sensor 12 months ago after a run in with a roo carcass. All seems to be going OK so far, I have done around 400km since resetting alarm and no new faults.
Hopefully a glitch when initiating a burn and dropped the error message
__________________
2012 MC Mondeo LX TDCi Wagon - Highway Hack 392K km and counting - Now gone 😢
2008 Peugeot 308 HDi - Highway Hack II
2008 Citroen C4 HDi - Highway Hack III
2010 Peugeot 308 HDi SW - Shaggin Wagon II
2016 VDJ200R Landcruiser GX Wagon - TTD V8 Power  !
2017 Toyota RAV4 GX Wagon - Shopping trolley - Gone
2022 Volvo XC40 T4 Inscription - Shopping trolley II
2002 BMW R1150GS
|