View Single Post
Old 16-05-2018, 07:03 AM   #22
bundybear75
Regular Member
 
bundybear75's Avatar
 
Join Date: Feb 2016
Location: Goulburn NSW
Posts: 316
Default Re: Engine malfunction warning and P244C DTC

So I bit the bullet and replaced the vaporiser. Trade price was a little over $420 at my local Ford. I could of got one cheaper off eBay but as the Mondeo got to the stage that it wouldn't complete a burn it was costing me $50 a day to drive my Cruiser.....

Attempted to change it myself but laying under the car (on ramps) using a long handled 22mm spanner and 3 foot of pipe I couldn't get enough of a swing at the nut to undo it.
I took it in to my mate the mechanic and lifted it up on his hoist and one of his boys changed it for me. Took a crows foot socket and a 3 foot bar to get it undone.

Definitely the cause, the hole was all but blocked up with carbon. After changing it did a complete burn and the soot levels have remained lower (only building up to 40% after 200km) than before where it was burning every 150/200km.

Time will tell but hopefully a win.
__________________
2012 MC Mondeo LX TDCi Wagon - Highway Hack 392K km and counting - Now gone 😢
2008 Peugeot 308 HDi - Highway Hack II
2008 Citroen C4 HDi - Highway Hack III
2010 Peugeot 308 HDi SW - Shaggin Wagon II
2016 VDJ200R Landcruiser GX Wagon - TTD V8 Power !
2017 Toyota RAV4 GX Wagon - Shopping trolley - Gone
2022 Volvo XC40 T4 Inscription - Shopping trolley II
2002 BMW R1150GS
bundybear75 is offline   Reply With Quote
2 users like this post: