OBD2 adapter to use with Forscan - Australian Ford Forums

Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

		Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Mondeo
OBD2 adapter to use with Forscan

FAQ

Calendar

Thread Tools

Display Modes

24-04-2021, 09:04 AM

NZ XR6

FF.Com.Au Hardcore

Join Date: Oct 2005

Location: Auckland, NZ

Posts: 1,255

OBD2 adapter to use with Forscan

The check engine light on the MB came on for the first time recently. Topping up the coolant fixed it - it came on after I parked across a slope, and the coolant level was just above the MIN line.

Anyway, I've been meaning to buy an adapter for some time and will go ahead and do so. A couple of questions first:

Are the Bluetooth adapters reliable, or is it better to buy a USB version and use a laptop?
There are some cheap adapters on eBay, or is it better to spend the extra on a OBDLink device. The EX would be under NZ$100 from the US.

__________________
MB Mondeo TDCi wagon, sea grey, on MAK Invidia 16" wheels.

« Previous Thread | Next Thread »

Forum Jump

All times are GMT +11. The time now is 08:35 PM.

Positive SSL