|
|
|
|
|
12-03-2023, 01:10 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: Oct 2005
Location: Auckland, NZ
Posts: 1,255
|
This has the same industry approvals as the Fuchs GT1 Flex 23. It even comes in the same, 7 and 10 l packs. The main difyappears to be that it will be cheaper than the Fuchs when on special!
Sent from my SM-S906E using Tapatalk
__________________
MB Mondeo TDCi wagon, sea grey, on MAK Invidia 16" wheels. |
||
|
|
|
12-03-2023, 08:47 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Oct 2005
Location: Auckland, NZ
Posts: 1,255
|
Not sure how "difference" became "dify"?
Sent from my SM-S906E using Tapatalk
__________________
MB Mondeo TDCi wagon, sea grey, on MAK Invidia 16" wheels. |
||
|
|
|
|
13-03-2023, 05:33 PM
|
#3 | ||
|
Challenge Accepted!
Join Date: Jan 2006
Location: Under the Southern Cross
Posts: 882
|
Apex+ Milti23 and Fuchs GT1 Flex23 are essentially in the same segment when it comes to oil specifications. Both are a C2/C3 (so mid-SAPS) oil. Yes both will achieve similar results after the service interval and yes Nulon would net you savings when on sale.
Nulon was easier to get and always cheaper when I bought oil, so it was a no brainer. I'd still use Apex+ if I had the vehicle.
__________________
Undecided replacement... [SOLD] -2009 MB Mondeo Zetec TDCI- [SOLD] |
||
|
|
|
|
14-03-2023, 01:12 PM
|
#4 | ||
|
Regular Member
Join Date: Dec 2022
Posts: 102
|
Is it better to use a C1 low SAPS oil with a DPF or are C2and C3 fine?
|
||
|
|
|
|
14-03-2023, 11:45 PM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: Oct 2005
Location: Auckland, NZ
Posts: 1,255
|
Peugeot specify C2 oil for their engines, so a C2/C3 oil should be fine. Fuchs GT1 Flex 23 works well in the MB.
Sent from my SM-S906E using Tapatalk
__________________
MB Mondeo TDCi wagon, sea grey, on MAK Invidia 16" wheels. |
||
|
|
|
|
19-03-2023, 12:48 AM
|
#6 | ||
|
Challenge Accepted!
Join Date: Jan 2006
Location: Under the Southern Cross
Posts: 882
|
to difficult to objectively say best...but what I do know, keeping to the vehicle's oil specifications requirements, turned out to have a great outcome for me. I saw my own engine components after dropping the sump for a leak repair. What I saw was a beautiful clean rotating assembly, no sludge, no deposits, just clean natural looking metal parts. That was using Nulon C3-12 from 120K kms to 270K kms every 15K kms.
__________________
Undecided replacement... [SOLD] -2009 MB Mondeo Zetec TDCI- [SOLD] |
||
|
|
|
Nulon Apex+ Multi 23
Linear Mode
