Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Mondeo

Reply
 
Thread Tools Display Modes
Old 14-04-2008, 01:01 PM   #1
Katoomba
Regular Member
 
Join Date: Mar 2008
Posts: 196
Default Hatch cover lid

I think that's what it might called - the black felt thingie that covers what's in the book and lifts up when you open the hatch.

Be warned - the little plastic things that hold the lid strings onto the hatch are VERY cheap and nasty. One popped out yesterday and cannot be put back as the three tiny plastic prongs that hold it are broken.

Another problem with the hatch door - it rained yesterday morning and later, after it stopped, I opened the hatch door and water poured into the boot at a point about 6 inches above the large rubber grommet on the sides.

After six weeks the annoyances are growing!

Katoomba is offline   Reply With Quote Multi-Quote with this Post
Old 14-04-2008, 01:28 PM   #2
TheColonel
Regular Member
 
TheColonel's Avatar
 
Join Date: Apr 2006
Location: Brisbane
Posts: 197
Default

Water in the hatch is a common issue, Ford have solved the issue in the 2008.5 release of the car. Water gets in the groove between the bottom on the glass and the rear deck lid, they have now put a rubber strip in the new mondeo's to stop this from happening, there is currently no plan to retrofit this to existing versions for the time being....
__________________
2008 Ford Mondeo XR5 Turbo - Panther Black
Airbox Plate Mod + BMC Panel Filter
TheColonel is offline   Reply With Quote Multi-Quote with this Post
Old 14-04-2008, 02:46 PM   #3
Katoomba
Regular Member
 
Join Date: Mar 2008
Posts: 196
Default

Thanks Colonel.
Katoomba is offline   Reply With Quote Multi-Quote with this Post
Old 14-04-2008, 03:26 PM   #4
TheColonel
Regular Member
 
TheColonel's Avatar
 
Join Date: Apr 2006
Location: Brisbane
Posts: 197
Default

As soon as the new cars are shipped here, or if anyone here notices the rubber strip below the bottom of the glass on the hatch, let me know, then i will see if i can get a ford part number for it and see if it can be retro fitted or if i can find a product that will do the job out there, there has got to be something, even a thin bit of black rubber hose fitted in there with both ends plugged will solve the issue pretty much
__________________
2008 Ford Mondeo XR5 Turbo - Panther Black
Airbox Plate Mod + BMC Panel Filter
TheColonel is offline   Reply With Quote Multi-Quote with this Post
Old 14-04-2008, 04:58 PM   #5
jared79
Sock Puppets
 
jared79's Avatar
 
Join Date: Dec 2007
Location: Brisbane
Posts: 154
Default

Looks like we are all the test subjects for the Mondeo, only because we bought them early. While there are a couple of little things that needs to be addressed, I am still over the moon with the car and look forward to driving it every day. For me though, I came from a 95 Falcon, so everything is 10x better than the falcon even with the little annoyances.

So I am still a happy man. Although, I did expect some teething issues and as long as they fix them, it doesn't bother me.
__________________

Ford Mondeo Zetec Hatch in Blue Ambition
jared79 is offline   Reply With Quote Multi-Quote with this Post
Old 14-04-2008, 05:06 PM   #6
scribbly
Regular Member
 
Join Date: Mar 2008
Location: Central Victoria
Posts: 419
Default

Talking about annoyances. While polishing the car I find scratches on the roof where it looks as if the mechanics left their tools while fitting the carry bars. :
The dealer to his credit said he will look at them when I'm in for the 3k check.
__________________

MA Mondeo
SZ Territory Titanium - >400,000 km
VF SSV Redline
BiTurbo Ranger XLT
scribbly is offline   Reply With Quote Multi-Quote with this Post
Old 14-04-2008, 05:15 PM   #7
Katoomba
Regular Member
 
Join Date: Mar 2008
Posts: 196
Default

Quote:
Originally Posted by jared79
So I am still a happy man....
Me too. When I win Lotto soon : , I'm off to order a 2nd one.
Katoomba is offline   Reply With Quote Multi-Quote with this Post
Old 14-04-2008, 05:18 PM   #8
Katoomba
Regular Member
 
Join Date: Mar 2008
Posts: 196
Default

Quote:
Originally Posted by scribbly
Talking about annoyances. While polishing the car I find scratches on the roof ...
Discovered our first shopping centre parking lot damage: small dent, scrap and paint loss behind driver's side rear wheel well. My wife and I were almost in tears .. :(

I wouldn't been responsible for my actions if I had seen it happen ...
Katoomba is offline   Reply With Quote Multi-Quote with this Post
Old 14-04-2008, 05:46 PM   #9
scribbly
Regular Member
 
Join Date: Mar 2008
Location: Central Victoria
Posts: 419
Default

Quote:
Originally Posted by TheColonel
As soon as the new cars are shipped here, or if anyone here notices the rubber strip below the bottom of the glass on the hatch, let me know, then i will see if i can get a ford part number for it and see if it can be retro fitted or if i can find a product that will do the job out there, there has got to be something, even a thin bit of black rubber hose fitted in there with both ends plugged will solve the issue pretty much
I just had a look at my car (after the other half brought it home) and it looks like little rubber ends have been fitted at the corner. I noticed after I washed the car on the weekend that no water went into the boot when I lifted the hatch. If these rubbers are the fix it looks like it forces the water to drip towards the outside of the car.
__________________

MA Mondeo
SZ Territory Titanium - >400,000 km
VF SSV Redline
BiTurbo Ranger XLT

Last edited by scribbly; 15-08-2011 at 02:31 PM.
scribbly is offline   Reply With Quote Multi-Quote with this Post
Old 14-04-2008, 08:00 PM   #10
jared79
Sock Puppets
 
jared79's Avatar
 
Join Date: Dec 2007
Location: Brisbane
Posts: 154
Default

Quote:
Originally Posted by scribbly
after I washed the car on the weekend
Oh man, at least you can wash your car. Stupid water restrictions.
__________________

Ford Mondeo Zetec Hatch in Blue Ambition
jared79 is offline   Reply With Quote Multi-Quote with this Post
Old 14-04-2008, 08:12 PM   #11
scribbly
Regular Member
 
Join Date: Mar 2008
Location: Central Victoria
Posts: 419
Default

I used the tank water. We have both - town water & 23500 litre tank.
__________________

MA Mondeo
SZ Territory Titanium - >400,000 km
VF SSV Redline
BiTurbo Ranger XLT
scribbly is offline   Reply With Quote Multi-Quote with this Post
Old 15-04-2008, 11:19 AM   #12
LRsedan
Now XR5hatch!
 
LRsedan's Avatar
 
Join Date: Sep 2007
Posts: 314
Default

Quote:
Originally Posted by scribbly
I just had a look at my car (after the other half brought it home) and it looks like little rubber ends have been fitted at the corner. I noticed after I washed the car on the weekend that no water went into the boot when I lifted the hatch. If these rubbers are the fix it looks like it forces the water to drip towards the outside of the car.
My XR5 is in for service today, I hope they fit these.

I hate the water entering the boot. No matter all the things Ive tried to stop it, you just can't.
LRsedan is offline   Reply With Quote Multi-Quote with this Post
Old 15-04-2008, 11:24 AM   #13
TheColonel
Regular Member
 
TheColonel's Avatar
 
Join Date: Apr 2006
Location: Brisbane
Posts: 197
Default

Those rubber ends in scribbly's post are the same as mine and are not the fixed version, vut from his pic you can see gap between the glass and the boot and that's what channels the water around and down to the side of the hatch... if Ford manage to fix this, you'll let us all know; right? ;)
__________________
2008 Ford Mondeo XR5 Turbo - Panther Black
Airbox Plate Mod + BMC Panel Filter
TheColonel is offline   Reply With Quote Multi-Quote with this Post
Old 15-04-2008, 02:43 PM   #14
ajay1940
Regular Member
 
Join Date: Aug 2007
Location: Heathmont
Posts: 52
Default

There are reports of European dealers retrofitting the rubber strip under warranty. So it should happen here eventually.
ajay1940 is offline   Reply With Quote Multi-Quote with this Post
Old 15-04-2008, 03:30 PM   #15
scribbly
Regular Member
 
Join Date: Mar 2008
Location: Central Victoria
Posts: 419
Default

I was just perusing the UK forum and they expect to post pictures soon of the fix.
__________________

MA Mondeo
SZ Territory Titanium - >400,000 km
VF SSV Redline
BiTurbo Ranger XLT
scribbly is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2008, 10:25 AM   #16
scribbly
Regular Member
 
Join Date: Mar 2008
Location: Central Victoria
Posts: 419
Default

An entry at the following site has pictures of the new strip...
http://www.fordmondeo.org/forum/show...hp?tid/771628/
__________________

MA Mondeo
SZ Territory Titanium - >400,000 km
VF SSV Redline
BiTurbo Ranger XLT
scribbly is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 06:01 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL