|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
22-05-2010, 07:09 PM
|
#1 | ||
|
XR5T
Join Date: May 2010
Location: QLD
Posts: 8
|
Hey,
Can anyone please tell me if they have replaced the small light bulbs in the Side Mirrors of thier XR5 Turbo's and how to do it...???  I have a 2010 model but I don't know if these lights were on the models previously but any idea from the owners would be appreciated. |
||
|
|
|
23-05-2010, 11:37 AM
|
#2 | ||
|
Regular Member
Join Date: Jul 2008
Posts: 423
|
Isn't it in the manual?
I think they are referred to as "puddle lights". |
||
|
|
|
|
29-05-2010, 09:28 PM
|
#3 | ||
|
XR5T
Join Date: May 2010
Location: QLD
Posts: 8
|
Read the entire manual and nothing talks about "puddle lights", infact there in so comment whatsoever on the lights in the side mirrors throughout the book - strange...!!!
|
||
|
|
|
|
31-05-2010, 05:12 PM
|
#4 | ||
|
Regular Member
Join Date: Jul 2008
Posts: 423
|
Stolen from http://www.fordmondeo.org/forum/show...hp?tid/816986/
Hi, a copy-paste from the manual + some comments: Position the mirror glass as far inwards as possible (so that there's a gap between mirror glass and mirror housing at the outer side). 1. Insert a screwdriver into the gap between the mirror housing and the mirror glass and release the metal retaining clip. (Initially it's hard to see the metal clip, let alone pointing the screwdriver in the right direction. It may be useful to point beam of 'keyring LED light' or small torch within the depths of mirror housing lower part and have a look.) 2. Remove the lamp (The outer side of the lamp will come out first). 3. Remove the bulb (If you intend to replace the original W5W with some sort of LEDs, be aware that the space therein is limited and not all 12V LED bulbs will fit in). |
||
|
|
|
XR5T - Side Mirror Lights
Linear Mode
