Putting PBR C5/C6 on Territory
Hi a quick question, what is required to put the aforementioned brakes on a SZ Territory. Had them on my AU 1 (changed all the hardware to AUII, what a pain!) and dont want to part with them.
Robert. |
Re: Putting PBR C5/C6 on Territory
Should bolt straight on. You will need 325mm discs if they came from falcon. Maybe change hoses. Turbo territory already has those calipers and 340mm x 32mm discs.
|
Re: Putting PBR C5/C6 on Territory
Yeah already have the 325mm rotors, just not sure of everything bolting up square, oh well time to pull of a wheel and check. Thanks for the reply.
|
Re: Putting PBR C5/C6 on Territory
I don't believe they do bolt up sorry but if you have all the goods you could check or i believe we can still get the TT calipers or the 340mm rotors.
|
Re: Putting PBR C5/C6 on Territory
Hi
Just Bought the PBR Blue off of a Typhoon Came with discs and hoses Bolts Straight on to my BA no problems Looking at Getting the bendix discs Catalogue show 355mm for PBR blue I rang the bendix hotline and they insist that is correct ? I asked them to go physically measure them and the bloke on the phone said no ! I emailed them and no reply We all know they are 325mm I rekon its a Typo Can anyone get their hands on a set of BR9607 to measure and check to see if its 325mm cheers https://i.ibb.co/X4gm8Mt/FPV.jpg upload pictures |
Re: Putting PBR C5/C6 on Territory
Quote:
|
All times are GMT +11. The time now is 01:09 PM. |
Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au