master cylinder for 6/4 brembos
When up grading a 2004 BA falcon to 6/4 brembo calipers do you need a FPV master cylinder to operate them properly or even a different booster???????
|
Re: master cylinder for 6/4 brembos
I beleive the master cyclinder in the FPV's was the same as a regular falcon. I also have the parts to upgrade to 6/4 brembos, just need the time to change it all over.
I am curious if a change is required for the master cylinder. |
Re: master cylinder for 6/4 brembos
When I first put them 6/4 brembos on this BA XT falcon they work great but for a while now they don’t seem to bit as good and I’m getting the ABS come on at random times mostly at light pedal input????.
I understand my cars ABS is tuned for a stock braking set up.... but it never used to do it so just asking in case I need to bring other parts up to spec Anyone got ideas on the ABS coming on?? |
Re: master cylinder for 6/4 brembos
There were different boosters and master cylinders in BA to BF series but had nothing to do with Brembos or standard brakes. It was more to do with if you had ABS, DSC, traction control etc.
|
Re: master cylinder for 6/4 brembos
FPV have different master cylinder for brembo combo. Its the crack pressure difference between front and rear.
|
Re: master cylinder for 6/4 brembos
1 Attachment(s)
Below are all the combinations of brake master cylinders for BA to BF Falcon including FPV..
Attachment 103433 |
Re: master cylinder for 6/4 brembos
Quote:
|
Re: master cylinder for 6/4 brembos
Quote:
|
Re: master cylinder for 6/4 brembos
i ended up fixing my issue i had some metal shavings on one of the sensors cleaned them up and all good now
|
All times are GMT +11. The time now is 03:32 PM. |
Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au