Quote:
|
Originally Posted by RedXR347
Mine had an odd knocking noise at cold start up when I was using a Z9 oil filter. Ever since I started using a Z89A (stubby Z9, about half the length) it hasn't been there. Btw I've found that mine actually runs better on Nulons 10w synthetic oil.
|
Thats because 220's run a Z89 ya goose, you're not supposed to put a Z9 on there! Itd be sucking too much oil into the filter cos its bigger than a Z89 hence the knocking noise.
220's run the Z89 cos of the oil cooler, 200's run Z9's.