|
|
|
|
|
24-05-2011, 06:57 PM
|
#1 | ||
|
Starter Motor
Join Date: Jan 2010
Posts: 21
|
Hi all,
I m not sure if anybody can help, but i would like to know if at TDC there is clearance between the valves and the piston on a 4L au. Mine has just swallowed one of the screws and part of the shaft from the throttle body butterfly. It rattled like hell, then the rattle went away, now it has no comp on number 6 and the spark plug was crushed. cheers Rick |
||
|
|
|
24-05-2011, 07:36 PM
|
#2 | ||
|
RIP...
Join Date: Dec 2004
Posts: 15,524
|
At best a bent valve, at worst a hole in the piston.
Most likely a bent valve though.
__________________
. Oval Everywhere... |
||
|
|
|
|
24-05-2011, 08:20 PM
|
#3 | ||
|
Starter Motor
Join Date: Jan 2010
Posts: 21
|
I was hoping only a valve. I will have to open it up and have a look
Thank Sox. |
||
|
|
|
valve to piston clearance
Re: valve to piston clearance
Linear Mode
