|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
18-02-2011, 08:03 PM
|
#1 | ||
|
Regular Member
Join Date: Jul 2010
Posts: 80
|
Hi guys,
I tried to figure it out myself, but I have no idea how to remove the above. I can see two black clips (one front, one back), and two screws (above the map light unit) that I can't undo because there's not enough room between them and the roof. Help?!  |
||
|
|
|
18-02-2011, 10:25 PM
|
#2 | ||
|
Flairs - Truckers Delight
Join Date: Aug 2006
Location: Brisbane Northside Likes: Opposite Lock
Posts: 5,731
|
so taking the lights out is easy, you just push them out and undo th plug
as for the rest of it, if i remember correctly it is actually fixed to the roof lining - you can feel more once you've got the lights out.
__________________
Current: Silhouette Black 2007 SY Ford Territory TX RWD 7-seater "Black Banger"
2006-2016: Regency Red 2000 AUII Ford Falcon Forte Automatic Sedan Tickford LPG "Millennium Falcon" |
||
|
|
|
|
18-02-2011, 10:28 PM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Sep 2009
Location: Brisbane, Qld
Posts: 683
|
You need to remove the sun visors and pillar trims and drop the roof lining to undo the screws. Don't kink the lining as its moulded and will be marked. There is a thread on how to remove the lining with pictures in the technical documents.
http://www.fordforums.com.au/showthread.php?t=11287096
__________________
AU XLS. |
||
|
|
|
|
19-02-2011, 12:45 AM
|
#4 | ||
|
Regular Member
Join Date: Jul 2010
Posts: 80
|
Awesome, thanks guys, i figured I'd have to pull the roof lining down after taking the lights out. Bit annoying but should be fun haha.
Cheers. |
||
|
|
|
|
24-08-2013, 07:20 PM
|
#5 | ||
|
Starter Motor
Join Date: Aug 2013
Posts: 4
|
The way to do it is you have to drop the whole roof lining down say a foot.
there are 4 screws that you have to undo then the sunglass case holder and 2 map reading light pop out |
||
|
|
|
Front Map Light/Sunglass Holder Removal
Linear Mode
